xNightR00T File Manager

EBN-MIB DEFINITIONS ::= BEGIN

 IMPORTS
         MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
                     FROM SNMPv2-SMI
         MODULE-COMPLIANCE, OBJECT-GROUP
                     FROM SNMPv2-CONF
         DisplayString, TEXTUAL-CONVENTION
                     FROM SNMPv2-TC
         SnaControlPointName
                 -- Because the characters allowed in an SNA control
                 -- point name come from a restricted character set,
                 -- these names are not subject to internationalization.
                 FROM APPN-MIB
         snanauMIB
                 FROM SNA-NAU-MIB;

 ebnMIB   MODULE-IDENTITY
        LAST-UPDATED "9804281800Z" -- April 28, 1998
        ORGANIZATION  "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
        CONTACT-INFO
                "
                        Bob Clouston
                        Cisco Systems
                        7025 Kit Creek Road
                        P.O. Box 14987
                        Research Triangle Park, NC 27709, USA
                        Tel:    1 919 472 2333
                        E-mail: clouston@cisco.com

                        Bob Moore
                        IBM Corporation
                        BRQA/501
                        P.O. Box 12195
                        Research Triangle Park, NC 27709, USA
                        Tel:    1 919 254 4436
                        E-mail: remoore@us.ibm.com
                "

        DESCRIPTION
            " The MIB Module for Extended Border Node"

        ::= { snanauMIB 7 }

 -- snanauMIB ::= { mib-2 34 }

 -- ******************************************************************
 -- Textual Conventions
 -- ------------------------------------------------------------------
 SnaNAUWildcardName   ::= TEXTUAL-CONVENTION
      STATUS current
      DESCRIPTION
          "Fully-qualified network NAU name. Entries take one of three
          forms:
             - Explicit entries do not contain the character '*'.
             - Partial Wildcard entries have the form 'ccc*', where
               'ccc' represents one to sixteen characters in a legal
               SNA NAU Name.
             - A full wildcard  consists of a single character '*'.

          Because the characters allowed in an SNA NAU name come from
          a restricted character set, these names are not subject to
          internationalization."

 SYNTAX DisplayString(SIZE(1..17))

 -- ******************************************************************
 ebnObjects              OBJECT IDENTIFIER ::= { ebnMIB 1 }
 -- ******************************************************************

 -- ******************************************************************
 -- EBN Directory Group
 -- The ebnDirTable is an extension to the appnDirTable.  It specifies
 -- the subnet affiliation for LUs in the EBN's directory.
 -- ******************************************************************

 ebnDir                  OBJECT IDENTIFIER ::= { ebnObjects 1 }

 ebnDirTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnDirEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The EBN Directory Table.  This table is an extension
          to the APPN MIB's appnDirTable.  Entries in this table
          are in one-to-one correspondence with entries in the
          appnDirTable, with corresponding entries having identical
          values for their respective indexes."

      ::= { ebnDir 1 }

 ebnDirEntry OBJECT-TYPE
      SYNTAX EbnDirEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Entry in the EBN Directory Table."

      INDEX { ebnDirLuName }

      ::= { ebnDirTable 1 }

 EbnDirEntry ::= SEQUENCE {
         ebnDirLuName             SnaNAUWildcardName,
         ebnDirSubnetAffiliation  INTEGER     }

 ebnDirLuName OBJECT-TYPE
      SYNTAX SnaNAUWildcardName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Fully qualified network LU name in the domain of a serving
          network node.  If this object has the same value as the
          appnDirLuName object in the APPN MIB, then the two objects
          are referring to the same LU."

      ::= { ebnDirEntry 1 }

 ebnDirSubnetAffiliation OBJECT-TYPE
      SYNTAX INTEGER { native (1),
                       nonNative (2),
                       subarea (3) }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "Specifies the subnetwork affiliation of the LU:
              - native(1)    : The LU is in the native APPN subnetwork.
              - nonNative(2) : The LU is in a non-native APPN subnetwork.
              - subarea(3)   : The LU is in a subarea network."

      ::= { ebnDirEntry 2 }

 -- ******************************************************************
 -- EBN Intermediate Session RSCV Group
 -- This table is a sparse extension to the appnIsInTable.  For
 -- sessions crossing ISTGs adjacent to the EBN, it contains the RSCV
 -- and COS used in the direction of the BIND destination.
 -- ******************************************************************

 ebnIsRscv               OBJECT IDENTIFIER ::= { ebnObjects 2 }

 ebnIsRscvTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnIsRscvEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The EBN Intermediate Session RSCV table.  This table is an
          extension to the appnIsInTable.  It contains the RSCV and COS
          used in the direction of the BIND destination.  There is an
          entry in this table for each session that traverses an ISTG
          when it enters or leaves this EBN, with corresponding entries
          having identical values for their respective indexes."

      ::= { ebnIsRscv 1}

 ebnIsRscvEntry OBJECT-TYPE
      SYNTAX EbnIsRscvEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Entry in ebnIsRscvTable."
      INDEX { ebnIsRscvCpName,
              ebnIsRscvPcid }

      ::= { ebnIsRscvTable 1 }

 EbnIsRscvEntry ::= SEQUENCE {
         ebnIsRscvCpName            SnaControlPointName,
         ebnIsRscvPcid              OCTET STRING,
         ebnIsRscvDestinationRoute  OCTET STRING,
         ebnIsRscvDestinationCos    DisplayString }

 ebnIsRscvCpName OBJECT-TYPE
      SYNTAX SnaControlPointName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The network-qualified control point name of the node at
          which the session and PCID originated.  For APPN and LEN
          nodes, this is either CP name of the APPN node at which
          the origin LU is located or the CP name of the NN serving
          the LEN node at which the origin LU is located.  For DLUR
          resources it is the name of the owning SSCP.

          If this object has the same value as the appnIsInFqCpName
          object in the APPN MIB, then the two objects are referring to
          the same APPN control point."

      ::= { ebnIsRscvEntry 1 }

 ebnIsRscvPcid OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE (8))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The procedure correlation identifier (PCID) of a session.
          It is an 8-octet value.

          If this object has the same value as the appnIsInPcid object
          in the APPN MIB, and if the corresponding ebnIsRscvCpName
          object has the same value as the corresponding
          appnIsInFqCpName object, then the entries indexed by these
          objects are referring to the same session."

      ::= { ebnIsRscvEntry 2 }

 ebnIsRscvDestinationRoute OBJECT-TYPE
      SYNTAX OCTET STRING(SIZE (0..255))
      MAX-ACCESS read-only

      STATUS current
      DESCRIPTION
          "The route selection control vector (RSCV x'2B') used in the
          direction towards the SLU."

      ::= { ebnIsRscvEntry 3 }

 ebnIsRscvDestinationCos OBJECT-TYPE
      SYNTAX DisplayString (SIZE (1..8))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The Class of Service (COS) name used in the direction
          towards the SLU.

          Because the characters allowed in an SNA COS name come from
          a restricted character set, these names are not subject to
          internationalization."

      ::= { ebnIsRscvEntry 4 }

 -- ******************************************************************
 -- EBN Directory Config Group
 -- The following simple objects provide information about EBN
 -- directory.
 -- ******************************************************************

 ebnDirConfig            OBJECT IDENTIFIER ::= { ebnObjects 3 }

 ebnSearchCacheTime    OBJECT-TYPE
      SYNTAX Unsigned32
      UNITS "minutes"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The amount of time in minutes an extended border node will
          retain information about a multi-subnetwork search, once
          that that search terminates.  A value 0 indicates that the
          EBN has no defined limit, and the number of entries is
          bounded only by memory."

      ::= { ebnDirConfig 1 }

 ebnMaxSearchCache OBJECT-TYPE
      SYNTAX Unsigned32
      UNITS "entries"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The maximum number of multi-subnet entries to be cached.
          The value 0 indicates that the local node has no defined
          limit, and the number of entries is bounded only by
          memory."

      ::= { ebnDirConfig 2 }

 ebnDefaultSubnetVisitCount  OBJECT-TYPE
      SYNTAX Unsigned32
      UNITS "topology subnetworks"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The default maximum number of subnetworks a LOCATE search
          procedure may traverse."

      ::= { ebnDirConfig 3 }

 -- ******************************************************************
 -- EBN COS Mapping Group
 -- The ebnCosMap Table specifies how non-native COS values are mapped
 -- to COS values defined in the native subnetwork.  The COS mappings
 -- that an EBN performs are determined by multiple factors, one of
 -- which is a set of user-defined mappings.  This table returns the
 -- COS mappings that the EBN is actually performing, rather than
 -- the user-defined mappings.
 -- ******************************************************************
 ebnCOS                  OBJECT IDENTIFIER ::= { ebnObjects 4 }

 ebnCosMapTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnCosMapEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The EBN COS Mapping Table.  This table specifies how non-
          native COS values are mapped to COS values defined in the
          native subnetwork.

          Note:  The COS mappings that an EBN performs are determined
          by multiple factors, one of which is a set of user-defined
          initial mappings.  This table returns the COS mappings that
          the EBN is actually performing at the time it is queried,
          rather than the user-defined initial ones."

      ::= { ebnCOS 1 }

 ebnCosMapEntry OBJECT-TYPE
      SYNTAX EbnCosMapEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "An entry in the EBN COS Mapping table."

      INDEX { ebnCosMapCpName,
              ebnCosMapNonNativeCos }

      ::= { ebnCosMapTable 1 }

 EbnCosMapEntry ::= SEQUENCE {
         ebnCosMapCpName              SnaNAUWildcardName,
         ebnCosMapNonNativeCos        DisplayString,
         ebnCosMapNativeCos           DisplayString }

 ebnCosMapCpName OBJECT-TYPE
      SYNTAX SnaNAUWildcardName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Fully qualified network CP name for which the COS mapping
          applies."

      ::= { ebnCosMapEntry 1 }

 ebnCosMapNonNativeCos OBJECT-TYPE
      SYNTAX DisplayString (SIZE(1..8))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "This object contains one of the following values:

             - An 8-character COS name used in a non-native subnetwork.
             - The single character '*', identifying the entry with the
               default native COS for a non-native CP name.  This entry
               is used when there is no entry in the table for a
               non-native CP name / non-native COS pair.

          Because the characters allowed in an SNA COS name come from
          a restricted character set, these names are not subject to
          internationalization."

      ::= { ebnCosMapEntry 2 }

 ebnCosMapNativeCos OBJECT-TYPE
      SYNTAX DisplayString (SIZE(1..8))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "An 8-byte name for the class-of-service, as known in the
          native subnetwork.

          Because the characters allowed in an SNA COS name come from
          a restricted character set, these names are not subject to
          internationalization."

      ::= { ebnCosMapEntry 3 }

 -- ******************************************************************
 -- EBN Subnet Routing List Group
 -- The EBN Subnet Routing List indicates to which nodes an EBN
 -- forwards search request.  This group contains information
 -- pertaining to the CONFIGURED Subnet Routing List at an EBN.  How a
 -- particular search request is routed is determined by a transient
 -- list that the EBN creates based on the configured list and other
 -- factors.
 -- *******************************************************************

 ebnSubnetRoutingList    OBJECT IDENTIFIER ::= { ebnObjects 5 }

 ebnSubnetSearchTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnSubnetSearchEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "This table contains one entry for each fully qualified LU
          name for which an associated subnet routing list has been
          defined.  An entry in this table contains general
          characteristics of the subnet search routing list for an
          LU name.  The routing list itself is represented by a set
          of contiguous entries in the ebnSearchTable."

      ::= { ebnSubnetRoutingList 1 }

 ebnSubnetSearchEntry OBJECT-TYPE
      SYNTAX EbnSubnetSearchEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "An entry for the ebnSubnetSearchTable.  The entry
          represents the configured parameters the EBN uses when it
          is determining how to search for the LU identified by the
          ebnSubnetSearchLuName object."

      INDEX { ebnSubnetSearchLuName }

      ::= { ebnSubnetSearchTable 1 }

 EbnSubnetSearchEntry ::= SEQUENCE {
         ebnSubnetSearchLuName   SnaNAUWildcardName,
         ebnSubnetSearchDynamics INTEGER,
         ebnSubnetSearchOrdering INTEGER   }

 ebnSubnetSearchLuName OBJECT-TYPE
      SYNTAX SnaNAUWildcardName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Fully qualified network LU name."

      ::= { ebnSubnetSearchEntry 1 }

 ebnSubnetSearchDynamics OBJECT-TYPE
      SYNTAX INTEGER { none(1),
                       limited (2),
                       full (3) }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "Indicates whether an EBN may add dynamic entries to a
          subnetwork routing list.  none(1) means no entries may be
          added to the subnetwork routing list.  limited(2) means
          only likely entries may be added to the subnetwork routing
          list.  full(3) means all native extended border nodes and
          adjacent, non-native EBNs and NNs will be added to the
          subnetwork routing list."

      ::= { ebnSubnetSearchEntry 2 }

 ebnSubnetSearchOrdering OBJECT-TYPE
      SYNTAX INTEGER{ priority(1),
                      defined(2) }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "Indicates whether an EBN may reorder a subnetwork routing
          list so that entries which are more likely to be successful
          move to the top of the subnetwork routing list and entries
          which are more likely to be unsuccessful move to the bottom
          of the list.
          The following values are defined:

             - priority(1):  Entries may be reordered.
             - defined(2):   Entries must not be reordered."

      ::= { ebnSubnetSearchEntry 3 }

 -- Border node search table

 ebnSearchTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnSearchEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "This table indicates the CONFIGURED list of control points
          to which the EBN sends Locate searches for a given fully
          qualified LU name.  Each entry in the table indicates one
          control point that should be included in a multi-subnet
          search for a particular LU name."

      ::= { ebnSubnetRoutingList 2 }

 ebnSearchEntry OBJECT-TYPE
      SYNTAX EbnSearchEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "An entry in the ebnSearchTable.  An entry can exist in
          this table only if an entry exists in the
          ebnSubnetSearchTable with an ebnSubnetSearchLuName value
          matching this entry's ebnSearchLuName.
          For a given ebnSearchLuName value, the ordering of entries
          provides by the ebnSearchIndex values corresponds to the
          order in which the control points to be searched appear in
          the CONFIGURED search list for the ebnSearchLuName."

      INDEX { ebnSearchLuName,
              ebnSearchIndex }

      ::= { ebnSearchTable 1 }

 EbnSearchEntry ::= SEQUENCE {
         ebnSearchLuName  SnaNAUWildcardName,
         ebnSearchIndex   Unsigned32,
         ebnSearchCpName  DisplayString,
         ebnSearchSNVC    Unsigned32  }

 ebnSearchLuName OBJECT-TYPE
      SYNTAX SnaNAUWildcardName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Fully qualified network LU name.  If this object has the
          same value as the ebnSubnetSearchLuName object, then the
          two objects are referring to the same LU."

      ::= { ebnSearchEntry 1 }

 ebnSearchIndex OBJECT-TYPE
      SYNTAX Unsigned32
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Secondary index enumerating the CONFIGURED order in which
          a search is forwarded to CPs for a particular LU name.  The
          order for an actual search is determined dynamically by the
          EBN, based on this configured information and on other
          factors, including whether search dynamics and search
          ordering are enabled.  Information on these last two settings
          is available in, respectively, the ebnSubnetSearchDynamics
          and ebnSubnetSearch ordering objects."

      ::= { ebnSearchEntry 2 }

 ebnSearchCpName OBJECT-TYPE
      SYNTAX DisplayString(SIZE(1..17))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "This object specifies the CP(s) to which a search should be
          forwarded.  It either follows the SnaNAUWildcardName textual
          convention or takes one of the following special formats:

             '*' indicates that all native EBNs and all adjacent non-
             native EBNs and NNs may be added to the routing list
             dynamically,

             '*SELF' indicates that the EBN should search itself and
             its native subnetwork at this time during the
             cross-subnet search,

             '*EBNS' indicates all native EBNs.

          Because the characters allowed in a CP name come from a
          restricted character set, and because the three formats
          listed here use no special characters, this object is not
          subject to internationalization."

      ::= { ebnSearchEntry 3 }

 ebnSearchSNVC OBJECT-TYPE
      SYNTAX Unsigned32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The maximum number of subnets a Locate search procedure may
          traverse.  "

      ::= { ebnSearchEntry 4 }

 -- *******************************************************************
 -- HPR Extended Border Node Intermediate Session Group
 -- The hbnIsInTable is a sparse extension to the appnIsInTable.
 -- For sessions that use back-to-back RTP connections in an HBN,
 -- this table provides the network connection endpoint identifier
 -- (NceId) and the transport connection identifier (Tcid) for the
 -- second RTP connection.
 -- *******************************************************************

 hbn                     OBJECT IDENTIFIER ::= { ebnObjects 6 }

 hbnIsInTable OBJECT-TYPE
      SYNTAX SEQUENCE OF HbnIsInEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The HBN Intermediate Session table."
      ::= { hbn 1}

 hbnIsInEntry OBJECT-TYPE
      SYNTAX HbnIsInEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Entry of the HBN Intermediate Session Table.  An entry
          exists in this table for every intermediate session being
          routed between back-to-back RTP connections in the HBN.

          When an entry for a session exists in this table, the
          NceIds and Tcids for the back-to-back RTP connections are
          made available in the following four objects:

             RTP connection in the direction of the PLU:
                - NceId:  appnIsInRtpNceId (in the APPN MIB)
                - Tcid:   appnIsinRtpTcid (in the APPN MIB).

             RTP connection in the direction of the SLU:
                - NceId:  hbnIsInRtpNceId (in this table)
                - Tcid:   hbnIsInRtpTcid (in this table)."

      INDEX { hbnIsInFqCpName,
              hbnIsInPcid }

 ::= { hbnIsInTable 1 }

 HbnIsInEntry ::= SEQUENCE {
         hbnIsInFqCpName    SnaControlPointName,
         hbnIsInPcid        OCTET STRING,
         hbnIsInRtpNceId    OCTET STRING,
         hbnIsInRtpTcid     OCTET STRING }

 hbnIsInFqCpName OBJECT-TYPE
      SYNTAX SnaControlPointName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The network-qualified control point name of the node at
          which the session and PCID originated.  For APPN and LEN
          nodes, this is either the CP name of the APPN node at
          which the origin LU is located or the CP name of the NN
          serving the LEN node at which the origin LU is located.

          If this object has the same value as the appnIsInFqCpName
          object in the APPN MIB, then the two objects are referring
          to the same APPN control point."
      ::= { hbnIsInEntry 1 }

 hbnIsInPcid OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The procedure correlation identifier (PCID) of a session.
          It is an 8-octet value.

          If this object has the same value as the appnIsInPcid object
          in the APPN MIB, and if the corresponding hbnIsInFqCpName
          object has the same value as the corresponding
          appnIsInFqCpName object, then the entries indexed by these
          objects are referring to the same session."

      ::= { hbnIsInEntry 2 }

 hbnIsInRtpNceId OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(1..8))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The HPR local Network Connection Endpoint of the session in
          the direction of the SLU."

      ::= { hbnIsInEntry 3 }

 hbnIsInRtpTcid OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The RTP connection local TCID of the session in the direction
          of the SLU."

      ::= { hbnIsInEntry 4 }

 -- *******************************************************************
 -- Conformance Statement
 -- *******************************************************************
 ebnConformance          OBJECT IDENTIFIER ::= { ebnMIB 2 }

 ebnCompliances          OBJECT IDENTIFIER ::= { ebnConformance 1 }
 ebnGroups               OBJECT IDENTIFIER ::= { ebnConformance 2 }

 -- Compliance statements
 ebnCompliance     MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
       "The compliance statement for the SNMPv2 entities which
       implement the ebnMIB."

   MODULE   -- this module

   --  Unconditionally mandatory groups
       MANDATORY-GROUPS {
                 ebnDirectoryGroup,
                 ebnIsRscvGroup,
                 ebnDirectoryConfigGroup,
                 ebnCosMappingGroup,
                 ebnSubnetRoutingListGroup }

   -- Conditionally mandatory groups
      GROUP hbnIsInGroup
      DESCRIPTION
          "The hbnIsInGroup is mandatory only for HPR extended border
          nodes."

      ::= {ebnCompliances 1 }

 -- Group definitions
 ebnDirectoryGroup OBJECT-GROUP
      OBJECTS { ebnDirSubnetAffiliation }
      STATUS current
      DESCRIPTION
          "The EBN-related directory objects."

      ::= { ebnGroups 1 }


 ebnIsRscvGroup OBJECT-GROUP
      OBJECTS { ebnIsRscvDestinationRoute,
                ebnIsRscvDestinationCos }
      STATUS current
      DESCRIPTION
          "Two objects representing RSCV and class of service
          information saved by an EBN."

      ::= { ebnGroups 2 }

 ebnDirectoryConfigGroup OBJECT-GROUP
      OBJECTS { ebnSearchCacheTime,
                ebnMaxSearchCache,
                ebnDefaultSubnetVisitCount }
      STATUS current
      DESCRIPTION
          "The EBN Directory Configuration Group."

      ::= { ebnGroups 3 }

 ebnCosMappingGroup OBJECT-GROUP
      OBJECTS {  ebnCosMapNativeCos }
      STATUS current
      DESCRIPTION
          "The EBN COS Mapping Group."

      ::= { ebnGroups 4 }

 ebnSubnetRoutingListGroup OBJECT-GROUP
      OBJECTS { ebnSubnetSearchDynamics,
                ebnSubnetSearchOrdering,
                ebnSearchCpName,
                 ebnSearchSNVC }
      STATUS current
      DESCRIPTION
          "The Subnet Routing List Group."

      ::= { ebnGroups 5 }

 hbnIsInGroup OBJECT-GROUP
      OBJECTS { hbnIsInRtpNceId, hbnIsInRtpTcid }
      STATUS current
      DESCRIPTION
          "The HBN-related Intermediate Session Objects."

      ::= { ebnGroups 6 }

END