xNightR00T File Manager

   AGGREGATE-MIB DEFINITIONS ::= BEGIN
    IMPORTS
      MODULE-IDENTITY,  experimental, Unsigned32,
      OBJECT-TYPE, Opaque
                 FROM SNMPv2-SMI
      OwnerString
                 FROM RMON-MIB
      RowStatus, StorageType, TEXTUAL-CONVENTION
                 FROM SNMPv2-TC
      MODULE-COMPLIANCE, OBJECT-GROUP
                 FROM SNMPv2-CONF
      SnmpAdminString
                 FROM SNMP-FRAMEWORK-MIB;

  aggrMIB MODULE-IDENTITY
       LAST-UPDATED "200604270000Z"        --  27th April, 2006
       ORGANIZATION "Cyber Solutions Inc. NetMan Working Group"
       CONTACT-INFO
      "                      Glenn Mansfield Keeni
                     Postal: Cyber Solutions Inc.
                             6-6-3, Minami Yoshinari
                             Aoba-ku, Sendai, Japan 989-3204.
                        Tel: +81-22-303-4012
                        Fax: +81-22-303-4015
                     E-mail: glenn@cysols.com

          Support Group E-mail: mibsupport@cysols.com"



          DESCRIPTION
                  "The MIB for servicing aggregate objects.

                   Copyright (C) The Internet Society (2006).  This
                   version of this MIB module is part of RFC 4498;
                   see the RFC itself for full legal notices.
                  "
          REVISION    "200604270000Z"      -- 27th April, 2006
          DESCRIPTION "Initial version, published as RFC 4498."
               ::= { experimental 123 }

   AggrMOErrorStatus ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION
       "This data type is used to model the error status of the
        constituent MO instances.  The error status for a
        constituent MO instance is given in terms of two elements:
          o The moIndex, which indicates the position of the MO
            instance (starting at 1) in the value of the aggregated
            MO instance.
          o The moError, which indicates the error that was
            encountered in fetching that MO instance.
        The syntax in ASN.1 Notation will be
        ErrorStatus :: = SEQUENCE {
           moIndex  Integer32,
           moError  SnmpPduErrorStatus
        }
        AggrMOErrorStatus ::= SEQUENCE OF {
           ErrorStatus
        }
        Note1: The command responder will supply values for all
               constituent MO instances, in the same order in
               which the MO instances are specified for the AgMO.
               If an error is encountered for an MO instance, then
               the corresponding value will have an ASN.1 value NULL,
               and an error will be flagged in the corresponding
               AggrMOErrorStatus object.
               Only MOs for which errors have been encountered will
               have their corresponding moIndex and moError values
               set.
        Note2: The error code for the component MO instances will be
               in accordance with the SnmpPduErrorStatus TC defined
               in the DISMAN-SCHEDULE-MIB [RFC3231].
        Note3: The command generator will need to know
               constituent MO instances and their order to correctly
               interpret AggrMOErrorStatus.
       "
     SYNTAX      Opaque (SIZE (0..1024))



   AggrMOValue ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION
       "This data type is used to model the aggregate
        MOs.  It will have a format dependent on the constituent
        MOs, a sequence of values.  The syntax in ASN.1 Notation will
        be
        MOValue :: = SEQUENCE {
             value ObjectSyntax
        }
        where 'value' is the value of a constituent MO instance.
        AggrMOValue :: = SEQUENCE OF {
            MOValue
        }

        Note: The command generator will need to know the
        constituent MO instances and their order to
        correctly interpret AggrMOValue."
     SYNTAX      Opaque (SIZE (0..1024))

   AggrMOCompressedValue ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION
       "This data type is used to model the compressed
        aggregate MOs."
     SYNTAX      OCTET STRING (SIZE (0..1024))

--
-- The aggregation control table
-- There will be a row for each aggregate MO
--
   aggrCtlTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AggrCtlEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
          "A table that controls the aggregation of the MOs."
        ::= {aggrMIB 1}

    aggrCtlEntry OBJECT-TYPE
        SYNTAX  AggrCtlEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
          "A row of the control table that defines one aggregated
           MO.





           Entries in this table are required to survive a reboot
           of the managed entity depending on the value of the
           corresponding aggrCtlEntryStorageType instance.
          "
        INDEX {aggrCtlEntryID }
        ::= {aggrCtlTable 1 }

    AggrCtlEntry ::= SEQUENCE {
       aggrCtlEntryID
                     SnmpAdminString,
       aggrCtlMOIndex
                     Unsigned32,
       aggrCtlMODescr
                     SnmpAdminString,
       aggrCtlCompressionAlgorithm
                     INTEGER,
       aggrCtlEntryOwner
                     OwnerString,
       aggrCtlEntryStorageType
                     StorageType,
       aggrCtlEntryStatus
                     RowStatus
    }

   aggrCtlEntryID OBJECT-TYPE
        SYNTAX SnmpAdminString (SIZE(1..32))
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
          "A locally unique, administratively assigned name
           for this aggregated MO.  It is used as an index to
           uniquely identify this row in the table."
        ::= { aggrCtlEntry 1 }

   aggrCtlMOIndex OBJECT-TYPE
        SYNTAX Unsigned32 (1..2147483647)
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
          "A pointer to a group of MOs identified by aggrMOEntryID
           in the aggrMOTable.  This is the group of MOs that will
           be aggregated."
        ::= { aggrCtlEntry 2 }

   aggrCtlMODescr OBJECT-TYPE
        SYNTAX SnmpAdminString (SIZE(0..64))
        MAX-ACCESS read-create
        STATUS current



        DESCRIPTION
          "A textual description of the object that is
           being aggregated."
        ::= {aggrCtlEntry 3}

   -- only one compression algorithm is defined as of now.
   aggrCtlCompressionAlgorithm OBJECT-TYPE
        SYNTAX INTEGER {
               none      (1),
               deflate   (2)
        }
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
          "The compression algorithm that will be used by
           the agent to compress the value of the aggregated
           object.
           The deflate algorithm and corresponding data format
           specification is described in RFC 1951.  It is
           compatible with the widely used gzip utility.
          "
        REFERENCE
          "RFC1951 : DEFLATE Compressed Data Format Specification
           version 1.3
          "
        DEFVAL { none }
        ::= {aggrCtlEntry 4}

   aggrCtlEntryOwner OBJECT-TYPE
        SYNTAX OwnerString
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
          "The entity that created this entry."
        ::= {aggrCtlEntry 5}

   aggrCtlEntryStorageType OBJECT-TYPE
        SYNTAX StorageType
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
           "This object defines whether the parameters defined in
            this row are kept in volatile storage and lost upon
            reboot or backed up by non-volatile (permanent)
            storage.

            Conceptual rows having the value 'permanent' need not
            allow write-access to any columnar objects in the row.



           "
        ::= {aggrCtlEntry 6}

   aggrCtlEntryStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
           "The row status variable, used according to row
            installation and removal conventions.
            Objects in a row can be modified only when the value of
            this object in the corresponding conceptual row is not
            'active'.
            Thus, to modify one or more of the objects in this
            conceptual row,
              a. change the row status to 'notInService',
              b. change the values of the row, and
              c. change the row status to 'active'.
            The aggrCtlEntryStatus may be changed to 'active' if
            all the MOs in the conceptual row have been assigned
            valid values.
           "
        ::= {aggrCtlEntry 7}

--
-- The Table of primary(simple) MOs
--
   aggrMOTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AggrMOEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
           "The table of primary(simple) MOs that will be aggregated.
            Each row in this table represents a MO that will be
            aggregated.  The aggrMOEntryID index is used to identify
            the group of MOs that will be aggregated.  The
            aggrMOIndex instance in the corresponding row of the
            aggrCtlTable will have a value equal to the value of
            aggrMOEntryID.  The aggrMOEntryMOID index is used to
            identify an MO in the group.
           "
        ::= {aggrMIB 2}

    aggrMOEntry OBJECT-TYPE
        SYNTAX  AggrMOEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION



           "A row of the table that specifies one MO.
            Entries in this table are required to survive a reboot
            of the managed entity depending on the value of the
            corresponding aggrMOEntryStorageType instance.
           "
        INDEX { aggrMOEntryID, aggrMOEntryMOID }
        ::= {aggrMOTable 1 }

    AggrMOEntry ::= SEQUENCE {
       aggrMOEntryID
                     Unsigned32,
       aggrMOEntryMOID
                     Unsigned32,
       aggrMOInstance
                     OBJECT IDENTIFIER,
       aggrMODescr
                     SnmpAdminString,
       aggrMOEntryStorageType
                     StorageType,
       aggrMOEntryStatus
                     RowStatus
    }

   aggrMOEntryID OBJECT-TYPE
        SYNTAX Unsigned32 (1..2147483647)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
          "An index uniquely identifying a group of MOs
           that will be aggregated."
        ::= { aggrMOEntry 1 }

   aggrMOEntryMOID OBJECT-TYPE
        SYNTAX Unsigned32 (1..65535)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
          "An index to uniquely identify an MO instance in the
           group of MO instances that will be aggregated."
        ::= { aggrMOEntry 2 }

   aggrMOInstance OBJECT-TYPE
        SYNTAX OBJECT IDENTIFIER
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
          "The OID of the MO instance, the value of which will
           be sampled by the agent."



        ::= { aggrMOEntry 3 }

   aggrMODescr OBJECT-TYPE
        SYNTAX SnmpAdminString (SIZE(0..64))
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
           "A textual description of the object that will
            be aggregated."
        ::= {aggrMOEntry 4}

   aggrMOEntryStorageType OBJECT-TYPE
        SYNTAX StorageType
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
           "This object defines whether the parameters defined in
            this row are kept in volatile storage and lost upon
            reboot or backed up by non-volatile (permanent)
            storage.
            Conceptual rows having the value 'permanent' need not
            allow write-access to any columnar objects in the row.
           "
        ::= {aggrMOEntry 5}

   aggrMOEntryStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
           "The row status variable, used according to row
            installation and removal conventions.
            Objects in a row can be modified only when the value of
            this object in the corresponding conceptual row is not
            'active'.
            Thus, to modify one or more of the objects in this
            conceptual row,
              a. change the row status to 'notInService',
              b. change the values of the row, and
              c. change the row status to 'active'.
            The aggrMOEntryStatus may be changed to 'active' iff
            all the MOs in the conceptual row have been assigned
            valid values.
           "
        ::= {aggrMOEntry 6}

   --
   -- aggrDataTable: The Table of Data.  Each row represents a Data



   --                set.  aggrCtlEntryID is the key to the table.
   --                It is used to identify instances of the
   --                aggregated MO that are present in the table.
   --
   aggrDataTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AggrDataEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Each row of this table contains information
            about an aggregateMO indexed by aggrCtlEntryID."
        ::= {aggrMIB 3}

   aggrDataEntry OBJECT-TYPE
        SYNTAX  AggrDataEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Entry containing information pertaining to
            an aggregate MO."
        INDEX {aggrCtlEntryID}
        ::= {aggrDataTable 1 }

   AggrDataEntry ::= SEQUENCE {
      aggrDataRecord
                 AggrMOValue,
      aggrDataRecordCompressed
                 AggrMOCompressedValue,
      aggrDataErrorRecord
                 AggrMOErrorStatus
      }

   aggrDataRecord OBJECT-TYPE
        SYNTAX AggrMOValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
          "The snapshot value of the aggregated MO.
           Note that the access privileges to this object will be
           governed by the access privileges of the component
           objects.  Thus, an entity attempting to access an
           instance of this MO MUST have access rights to all the
           component instance objects and this MO instance.
          "
        ::= { aggrDataEntry 1}

   aggrDataRecordCompressed OBJECT-TYPE
        SYNTAX AggrMOCompressedValue



        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
          "The compressed value of the aggregated MO.
           The compression algorithm will depend on the
           aggrCtlCompressionAlgorithm given in the corresponding
           aggrCtlEntry.  If the value of the corresponding
           aggrCtlCompressionAlgorithm is (1) 'none', then the value
           of all instances of this object will be a string of zero
           length.
           Note that the access privileges to this object will be
           governed by the access privileges of the component
           objects.  Thus, an entity attempting to access an instance
           of this MO MUST have access rights to all the component
           instance objects and this MO instance.
          "
        ::= { aggrDataEntry 2}

   aggrDataErrorRecord OBJECT-TYPE
        SYNTAX AggrMOErrorStatus
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
           "The error status corresponding to the MO instances
            aggregated in aggrDataRecord (and
            aggrDataRecordCompressed)."
        ::= { aggrDataEntry 3}

    -- Conformance information
   aggrConformance OBJECT IDENTIFIER ::= { aggrMIB 4 }
   aggrGroups      OBJECT IDENTIFIER ::= { aggrConformance 1 }
   aggrCompliances OBJECT IDENTIFIER ::= { aggrConformance 2 }

    -- Compliance statements
   aggrMibCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for SNMP entities
                 that implement the AGGREGATE-MIB."
        MODULE  -- this module
            MANDATORY-GROUPS { aggrMibBasicGroup }
        ::= { aggrCompliances 1 }

    -- Units of conformance
   aggrMibBasicGroup    OBJECT-GROUP
        OBJECTS {
                   aggrCtlMOIndex,
                   aggrCtlMODescr,



                   aggrCtlCompressionAlgorithm,
                   aggrCtlEntryOwner,
                   aggrCtlEntryStorageType,
                   aggrCtlEntryStatus,
                   aggrMOInstance,
                   aggrMODescr,
                   aggrMOEntryStorageType,
                   aggrMOEntryStatus,
                   aggrDataRecord,
                   aggrDataRecordCompressed,
                   aggrDataErrorRecord
       }
        STATUS  current
        DESCRIPTION
                "A collection of objects for aggregation of MOs."
        ::= { aggrGroups 1 }
   END