xNightR00T File Manager

2012-11-19  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.19

	*  DCCP protocol support (rfc4340), by Samuel Jero

	   Use "-D" option for it (the protocol-specific options
	   are available too).

	*  Update COPYING and COPYING.LIB license files to the latest
	   published ones (due to FSF address changes etc.) (Jan Synacek)

	*  Add mention of "-l" option to manual (Filip Holec)


2011-08-16  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.18

	*  Handle new dgram icmp sockets ("echo ping sockets"),
	   appeared in kernel 3.0 .

	   Now unprivileged users may perform ICMP tracerouting
	   without any special rights of the executable
	   (neither setuid bits nor cap_net_raw settings).
	   It is allowed if any group of a user matches sysctl range
	   of "net/ipv4/ping_group_range".

	   The support for dgram icmp way (and whether it is allowed)
	   is auto-detected at runtime. First, the traditional raw socket
	   is tried (for full compatibility reasons), then new dgram
	   socket as a fallback.
	   The icmp module now has two additional options "raw" and "dgram",
	   which cause to try one particular way only.

	   Note, that there is no IPv6 implementation for dgram icmp sockets
	   in kernels 3.0 yet, but new traceroute is ready for it anyway.

	*  New tcp module option `info' ("-T -O info"),
	   which prints all tcp flags of tcp reply from the reached
	   target host.

	   The flags are shown comma-separated in the same place
	   where icmp extensions is printed (ie. in `<>' brackets)

	   This feature is utilized by tcptraceroute wrapper now,
	   and allow it to be completely functional replacement
	   of the original tcptraceroute.

	*  Fix determination of system-wide ECN setings for tcp module.

	   Since the kernel 2.6.31 the default sysctl net/ipv4/tcp_ecn
	   was changed from zero to '2', whereas the actual value
	   for ecn to be set is still '1'

	*  Allow different packet sizes for `--mtu'.
	   Suport `-l' option for tracepath wrapper.

	*  Some code and manual cleanups


2010-12-14  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.17

	*  Adapt code to make possible the use of Linux capabilities
	   (for raw sockets etc.) instead of superuser privileges only.

	   On modern systems the capabilities can be stored as
	   file attributes, ie.:

	   "setcap cap_net_raw=pe /usr/bin/traceroute"


2010-09-13  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.16

	*  A little work-around in the build system
	   for the new (buggy?) make 3.82

	*  Add `--fwmark=num' option for firewall mark (for kernel >= 2.6.25).
	   Idea comes from an anonymous SF patch #3042539


2010-07-14  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.15

	*  Use string routines more safely (fix SF bug #3029216)

	*  Provide help for lft wrapper


2010-04-21  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.14

	*  Fix support for IPv6's flow_labels and tclass.
	   Thanks to Peter Bieringer for testing

	*  Use route header "type 2" instead of deprecated "type 0"
	   for `-g' option for IPv6. The default value can be changed
	   by specifying a number in the place of the first `-g' address.


2009-11-02  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.13

	*  Check for first_hop is not zero value (vladz@devzero.fr)

	*  Always fill unresolved IP address by its numeric interpretation,
	   even if getnameinfo(3) leaves it untouched (as it does for ipv6
	   in some glibc versions, whereas always fills for ipv4)

	*  Cosmetic changes for man page (Andreas Mohr)


2008-09-15  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.12

	*  Use common recv_reply() routine for all modules which
	   do recvmsg(2) call. Method-specific things go to callbacks.

	   Pass to init methods pointer to datalen instead of the value.

	*  Implement ICMP Extension support (rfc4884), `-e' option.
	   Parse MPLS info (rfc4950) to be more readable (Kaj Niemi)

	*  Implement Path MTU Discovery (similar to tracepath(1)),
	   with `--mtu' option. Changed mtu is printed once in a form 
	   of `F=NUM' at the first probe of a hop which requires
	   such mtu to be reached. (Actually, the correspond "frag needed"
	   icmp message is normally sent by the previous hop).

	*  Print the number of backward hops when it differs with forward,
	   by `--back' option. The backward hops is guessed by a technique
	   similar to tracepath(1), there is no reliable way to obtain
	   such info though.

	*  The optional second argument (packet_len) now is the full length
	   of the packet, including IP headers. (It is obvious enough due to
	   the nature of this feature, and this is the behaviour of the
	   original traceroute). Particular trace methods can ignore this
	   (fe. tcp), or increase it up to the minimal value (udp, icmp).
	   The actual packet's size is alvays reported in the output header.

	*  Add tracepath(1)/tracepath6(1) shell wrapper.

	*  Allow DEF_AF to be redefined at cmdline (Teran McKinney)

	*  Do not check the correctness of `sim_probes' value -- it is
	   unneeded at all. This also fixes a bug when a value of sim_probes
	   appears to be more than the total number of probes.
	   Reported by Milos Malik.

	*  Allow default UDP method to cross zero port boundary (Milos Malik).
	   It is a strange corner case, but traditional traceroute
	   behaves exactly so.


2008-04-25  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.11

	*  Use new pmtudisc value "probe" instead of "do" for `-F' option
	   (available since the kernel 2.6.22).

	   For kernels before 2.6.22, the `-F' (dontfragment) option
	   seems completely useless for IPv6 and partially useful
	   for IPv4 (when a user can flush routing caches some way).

	*  Fix installation in build system (Mike Frysinger)

	*  Don't compute checksum for ipv6 icmp packets ourselves,
	   the kernel overwrites it anyway by the proper values.

	*  Don't use explicit path to traceroute in wrapper scripts


2008-04-17  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.10

	*  raw_can_connect(): ipv6 connected raw sockets
	   receive MSG_ERRQUEUE properly only for kernels >= 2.6.25

	*  remove useless "host" parameter for init methods

	*  add probe_by_seq() and probe_by_sk() routines,
	   don't pass whole probes' pointer to recv_probe method

	*  collect all sends in do_send() routine

	*  Interpret ENOBUFS errors for send(2) as "can retry later".

	   Slow devices (like ppp) with small tx_queue_len can reject
	   the sending of too many packets simultaneously. To handle this,
	   do_send() now returns a negate value in a case of ENOBUFS
	   and similar (instead of program exit). The send_probe method
	   clears the probe and returns immediately in such cases.
	   Then, if there is an amount of time to wait for something,
	   the failed probe will be attempted again after that time expired.
	   If nothing to wait more, the program is exited.


2007-09-26  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.9

	*  Complete manual page.

	*  Edit manual page to sound more English, thanks to Chris Ward


2007-09-04  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.8

	*  Move all wrappers to special "wrappers/" dir.
	   Add lft(8) shell wrapper.
	   Add traceproto(8) shell wrapper.
	   Add traceroute-nanog(8) shell wrapper.

	*  Interpret first_hop as number, not index

	*  Build system is re-worked to match more the modern requirements
	   (Thanks to Mike Frysinger for testing).

	*  Check for kernel version >= 2.6.22.2 in raw_can_connect()

	*  Add generic "raw" method, "-P protonum" option.
	   New "one_per_time" flag for tr_module.


2007-07-31  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.7

	*  Fix revents checking typo

	*  Expect normal data reply from udp too.

	*  Implement udp to port (-U) and udplite (-UL) methods.
	   Both available for unprivileged users.
	   Add "coverage" option for udplite.

	*  Allow non-digit service names for `-p' and `--sport'

	*  Drop period at the end of "SEE ALSO" section, and
	   avoid specific distro names in the manual (Mike Frysinger)

	*  Explicitly mention that this program is licensed
	   as "GPL version 2 or any later version".
	   (Similar for libsupp subdir: LGPL version 2.1 or any later).

	*  Always check whether the dest and source port match in
	   received packets. Can decrease an amount of (hypothetical)
	   garbage received just after the bind() but before connect()


2007-07-19  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.6

	*  Rename tr_ops to tr_module

	*  Implement module-specific options (-O opt,...)

	*  Add TCP specific options (all the tcp header flags,
	   ecn, sack, timestamps, window_scaling, mss, sysctl)
	   Build tcp probe packet depending on them.

	*  Add "--sport" option for explicit source port selection.
	   Always cause "-N 1" when it is set.

	*  Add new routine bind_socket().
	   Always (auto)bind sockets in tune_socket().

	*  Add tcptraceroute(8) shell wrapper


2007-07-16  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.5

	*  Use MSG_ERRQUEUE for raw sockets too.

	*  raw_can_connect () work-around for kernel bug #8747

	*  random.c, csum.c: new separate files

	*  New implementation of tcp method ("-T"), using
	   half-open technique. The old implementation module
	   renamed to "tcpconn" ("-M tcpconn").

	*  Common parse_cmsg() routine

	*  put ee_info for parse_icmp_res() too,
	   handle ICMP6_PACKET_TOO_BIG for IPv6,
	   report "!F-num" when "frag needed" (legacy compatibility)


2007-07-11  Dmitry Butskoy  <Dmitry@Butskoy.name> - 2.0.4

	*  clear includes of unneeded headers

	*  move poll stuff to separate poll.c

	*  add module stuff (module.c), options etc.
	   Adapt udp/icmp/tcp for this.

	*  Add common routines use_recverr() and set_ttl()


2007-02-28  Dmitry Butskoy  <Dmitry@Butskoy.name>

	*  fix variable type for getsockname (Mike Frysinger)


2007-01-09  Dmitry Butskoy  <Dmitry@Butskoy.name>  - 2.0.3

	*  version 2.0.3

	*  allow option args without separator (add CLIF_MAY_JOIN_ARG flag),
	   for compatibility (Benjamin LaHaise)

	*  no more "tcptraceroute" symlink for rpm packages, because
	   it conflicts with the same-name old package anyway (James Ralston)

	*  fix compilation on glibc < 2.4 (Andy Shevchenko)


2006-10-30  Dmitry Butskoy  <Dmitry@Butskoy.name>  - 2.0.2

	*  version 2.0.2

	*  More accurate check_expired() routine.

	*  Some minor fixes.

	*  Add NOTES section to manual


2006-10-20  Dmitry Butskoy  <Dmitry@Butskoy.name>  - 2.0.1

	*  version 2.0.1

	*  Now ops methods write send_time (as well as recv_time)

	*  Use SO_TIMESTAMP to obtain msecs precisely

	*  Complete manual