xNightR00T File Manager

#! /bin/sh -x
#
# sample script on using the ingress capabilities
# This script tags the fwmark on the ingress interface using IPchains
# the result is used first for policing on the Ingress interface then
# for fast classification and re-marking
# on the egress interface
#
#path to various utilities;
#change to reflect yours.
#
IPROUTE=/root/DS-6-beta/iproute2-990530-dsing
TC=$IPROUTE/tc/tc
IP=$IPROUTE/ip/ip
IPCHAINS=/root/DS-6-beta/ipchains-1.3.9/ipchains
INDEV=eth2
EGDEV="dev eth1"
#
# tag all incoming packets from host 10.2.0.24 to value 1
# tag all incoming packets from host 10.2.0.3 to value 2
# tag the rest of incoming packets from subnet 10.2.0.0/24 to value 3
#These values are used in the egress
############################################################ 
$IPCHAINS -A input -s 10.2.0.0/24 -m 3
$IPCHAINS -A input -i $INDEV -s 10.2.0.24 -m 1
$IPCHAINS -A input -i $INDEV -s 10.2.0.3 -m 2
############################################################ 
#
# install the ingress qdisc on the ingress interface
############################################################ 
$TC qdisc add dev $INDEV handle ffff: ingress
############################################################ 

#
# attach a fw classifier to the ingress which polices anything marked
# by ipchains to tag value 3 (The rest of the subnet packets -- not
# tag 1 or 2) to not go beyond 1.5Mbps
# Allow up to at least 60 packets to burst (assuming maximum packet 
# size of # 1.5 KB) in the long run and upto about 6 packets in the
# shot run

############################################################ 
$TC filter add dev $INDEV parent ffff: protocol ip prio 50 handle 3 fw \
police rate 1500kbit burst 90k mtu 9k drop flowid :1
############################################################ 

######################## Egress side ########################


# attach a dsmarker
#
$TC qdisc add $EGDEV handle 1:0 root dsmark indices 64
#
# values of the DSCP to change depending on the class
#
$TC class change $EGDEV classid 1:1 dsmark mask 0x3 \
       value 0xb8
$TC class change $EGDEV classid 1:2 dsmark mask 0x3 \
       value 0x28
$TC class change $EGDEV classid 1:3 dsmark mask 0x3 \
       value 0x48
#
#
# The class mapping
#
$TC filter add $EGDEV parent 1:0 protocol ip prio 4 handle 1 fw classid 1:1
$TC filter add $EGDEV parent 1:0 protocol ip prio 4 handle 2 fw classid 1:2
$TC filter add $EGDEV parent 1:0 protocol ip prio 4 handle 3 fw classid 1:3
#

#
echo "---- qdisc parameters Ingress  ----------"
$TC qdisc ls dev $INDEV
echo "---- Class parameters Ingress  ----------"
$TC class ls dev $INDEV
echo "---- filter parameters Ingress ----------"
$TC filter ls dev $INDEV parent ffff:

echo "---- qdisc parameters Egress  ----------"
$TC qdisc ls $EGDEV
echo "---- Class parameters Egress  ----------"
$TC class ls $EGDEV
echo "---- filter parameters Egress ----------"
$TC filter ls $EGDEV parent 1:0
#
#deleting the ingress qdisc
#$TC qdisc del $DEV ingress